Prof. Dr.-Ing. habil. Carolin Körner

Leitung

Adresse

Martensstraße 5-791058 Erlangen

Kontakt

E-Mail: carolin.koerner@fau.de

Funktionen

Inhaberin Lehrstuhl WTM
Mitglied der kollegialen Leitung des Zentralinstitutes Neue Materialien und Prozesstechnik ZMP in Fürth
Wissenschaftliche Leitung des Bereiches Additive Fertigung bei der Neue Materialien Fürth GmbH

Klassen A., Forster V., Körner C.:
A multi-component evaporation model for beam melting processes
In: Modelling and Simulation in Materials Science and Engineering 25 (2017), Art.Nr.: 025003
ISSN: 1361-651X
DOI: 10.1088/1361-651X/aa5289

Rai A., Helmer H., Körner C.:
Simulation of grain structure evolution during powder bed based additive manufacturing
In: Additive Manufacturing 13 (2017), S. 124-134
ISSN: 2214-7810
DOI: 10.1016/j.addma.2016.10.007

Körner C.:
Additive manufacturing of metallic components by selective electron beam melting - A review
In: International Materials Reviews 61 (2016), S. 361-377
ISSN: 0308-4590
DOI: 10.1080/09506608.2016.1176289

Körner C., Bauereiß A., Attar E.:
Fundamental consolidation mechanisms during selective beam melting of powders
In: Modelling and Simulation in Materials Science and Engineering 21 (2013), Art.Nr.: 085011
ISSN: 0965-0393
DOI: 10.1088/0965-0393/21/8/085011

Heinl P., Müller L., Körner C., Singer R., Müller F.:
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
In: Acta Biomaterialia 4 (2008), S. 1536-1544
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2008.03.013

Böhm J., Markl M., Körner C.:
High-throughput numerical exploration of preheating and sintering in electron beam powder bed fusion
In: Thermal Science and Engineering Progress 69 (2026), Art.Nr.: 104405
ISSN: 2451-9057
DOI: 10.1016/j.tsep.2025.104405

Berger T., Renner J., Wahlmann B., Körner C.:
Detection of aluminum evaporation for TiAl using electron optical imaging in an electron beam powder bed fusion system — A feasibility study
In: Additive Manufacturing 114 (2025), Art.Nr.: 105034
ISSN: 2214-7810
DOI: 10.1016/j.addma.2025.105034
Breuning C., Renner J., Markl M., Körner C.:
Processing Strategies for Electron Beam Based Powder Bed Fusion
In: Dietmar Drummer, Michael Schmidt (Hrsg.): Progress in Powder Based Additive Manufacturing, Springer Nature, 2025, S. 127-148 (Springer Tracts in Additive Manufacturing, Bd.Part F386)
DOI: 10.1007/978-3-031-78350-0_7
Bäreis J., Wahlmann B., Körner C.:
Single crystal twisting in additive manufacturing
In: Progress in Additive Manufacturing (2025), Art.Nr.: 117133
ISSN: 2363-9512
DOI: 10.1007/s40964-025-01158-6
Chen Y., Böhm J., Wahlmann B., Krüger M., Körner C.:
Rapid processing window development of Mo-Si-B alloy for electron beam powder bed fusion
In: Progress in Additive Manufacturing (2025)
ISSN: 2363-9512
DOI: 10.1007/s40964-025-01119-z
Feyer F., Hsiung MH., Randelzhofer P., Körner C.:
Functional Property Improvement Of The HPDC Alloy AlSi9Cu3Fe Through Sr And Heat Treatment
6th International Conference on Light Materials - LightMat 2025 (Montreal, 7. Juli 2025 - 10. Juli 2025)
Feyer F., Randelzhofer P., Körner C.:
Influence of mould filling and microstructure on electrical conductivity in aluminium high pressure die casting parts
In: Journal of Physics: Conference Series 3035 (2025), Art.Nr.: 012003
ISSN: 1742-6588
DOI: 10.1088/1742-6596/3035/1/012003
Feyer F., Weigand M., Randelzhofer P., Körner C.:
Increasing the conductivity of aluminium high-pressure die casting alloy AlSi9Cu3Fe (226D) by Sr modification of eutectic and intermetallic phases
In: Materials Science and Engineering B-Advanced Functional Solid-State Materials 316 (2025), Art.Nr.: 118109
ISSN: 0921-5107
DOI: 10.1016/j.mseb.2025.118109
Kupfer T., Leimbach S., Spano L., Pohl S., Körner C., Markl M.:
Spot melting sequences for complex geometries in electron beam powder bed fusion
In: Progress in Additive Manufacturing (2025)
ISSN: 2363-9512
DOI: 10.1007/s40964-025-01251-w
Renner J., Berger T., Körner C.:
In situ powder height measurement as process signature for quality control in electron beam powder bed fusion
In: Additive Manufacturing 110 (2025), Art.Nr.: 104910
ISSN: 2214-7810
DOI: 10.1016/j.addma.2025.104910
Scherr R., Hirschfelder T., Markl M., Körner C.:
Simulation-driven development of in-situ alloying Cu-25Cr by electron beam powder bed fusion
In: Additive Manufacturing 109 (2025), Art.Nr.: 104874
ISSN: 2214-7810
DOI: 10.1016/j.addma.2025.104874
Semjatov N., König HH., Bidola PM., Abreu-Faria G., Wahlmann B., Lindwall G., Körner C.:
In-situ synchrotron imaging of powder consolidation and melt pool dynamics in electron beam powder bed fusion
In: Additive Manufacturing 110 (2025), Art.Nr.: 104943
ISSN: 2214-7810
DOI: 10.1016/j.addma.2025.104943
Westrich Y., Kammermeier E., Wahlmann B., Körner C.:
Three-dimensional spot melting patterns in electron beam powder bed fusion: high efficiency and tailored texture
In: Progress in Additive Manufacturing (2025)
ISSN: 2363-9512
DOI: 10.1007/s40964-025-01255-6
Yang Z., Herrnböck L., Markl M., Mergheim J., Steinmann P., Körner C.:
Mesoscopic Modeling and Simulation of Properties of Additively Manufactured Metallic Parts
In: Dietmar Drummer, Michael Schmidt (Hrsg.): Progress in Powder Based Additive Manufacturing, Springer Nature, 2025, S. 309-330 (Springer Tracts in Additive Manufacturing, Bd.Part F386)
DOI: 10.1007/978-3-031-78350-0_15

Breuning C., Markl M., Körner C.:
A Scan Strategy Based Compensation of Cumulative Heating Effects in Electron Beam Powder Bed Fusion
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00807-6
Breuning C., Markl M., Körner C.:
Correction to: A Scan Strategy Based Compensation of Cumulative Heating Effects in Electron Beam Powder Bed Fusion (Progress in Additive Manufacturing, (2024), 10.1007/s40964-024-00807-6)
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00841-4
Böhm J., Breuning C., Markl M., Körner C.:
A new approach of preheating and powder sintering in electron beam powder bed fusion
In: International Journal of Advanced Manufacturing Technology (2024)
ISSN: 0268-3768
DOI: 10.1007/s00170-024-13966-1
Chen Y., Fu Z., Ye J., Wahlmann B., Körner C.:
Additive Manufacturing of TiC/Steel Composites Using Electron Beam Melting and In Situ Infiltration
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202301313
Fink A., Rudolf D., Wahlmann B., Freund H., Körner C.:
Thermo‐mechanical Study on Auxetic Shape Memory Periodic Open Cellular Structures—Part II: Mechanical and Shape Memory Properties
In: Advanced Engineering Materials 26 (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202401310
Fink A., Wahlmann B., Körner C.:
Anisotropic Superelastic and Shape Memory Effect of Nitinol Manufactured by Electron Beam Powder Bed Fusion
In: Advanced Materials & Sustainable Manufacturing 1 (2024), Art.Nr.: 10004
ISSN: 3006-2810
DOI: 10.35534/amsm.2024.10004
Gaag T., Heidowitzsch M., Galgon F., Körner C., Zenk C.:
A Novel Approach for Rapid Material Library Generation Using Laser-Remelting
In: Advanced Engineering Materials 26 (2024), Art.Nr.: 2301316
ISSN: 1438-1656
DOI: 10.1002/adem.202301316
Gaag T., Weidinger J., Bandorf J., Lux V., Wahlmann B., Neumeier S., Zenk C., Körner C.:
Experimental Validation of Property Models and Databases for Computational Superalloy Design
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202401051
Kammermeier E., Weidinger J., Ionov I., Ramsperger M., Wahlmann B., Körner C., Zenk C.:
Accelerating Alloy Development for Additive Manufacturing
15th International Symposium on Superalloys, ISS 2024 (Pennsylvania, PA, 8. September 2024 - 12. September 2024)
In: Jonathan Cormier, Ian Edmonds, Stephane Forsik, Paraskevas Kontis, Corey O’Connell, Timothy Smith, Akane Suzuki, Sammy Tin, Jian Zhang (Hrsg.): Minerals, Metals and Materials Series 2024
DOI: 10.1007/978-3-031-63937-1_11
Koepf JA., Pistor J., Markl M., Körner C.:
Numerical Microstructure Prediction for Lattice Structures Manufactured by Electron Beam Powder Bed Fusion
In: Crystals 14 (2024), Art.Nr.: 149
ISSN: 2073-4352
DOI: 10.3390/cryst14020149
Markl M., Azadi Tinat MR., Berger T., Renner J., Körner C.:
Extracting powder bed features via electron optical images during electron beam powder bed fusion
In: Additive Manufacturing Letters 10 (2024), Art.Nr.: 100220
ISSN: 2772-3690
DOI: 10.1016/j.addlet.2024.100220
Markl M., Azadi Tinat MR., Berger T., Westrich Y., Renner J., Körner C.:
In-situ electron beam characterization for electron beam powder bed fusion
In: Additive Manufacturing 96 (2024), Art.Nr.: 104567
ISSN: 2214-7810
DOI: 10.1016/j.addma.2024.104567
Markl M., Colosimo BM., Körner C.:
Progress in electron beam additive manufacturing
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00679-w
Renner J., Markl M., Körner C.:
In situ build surface topography determination in electron beam powder bed fusion
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00621-0
Rudolf D., Fink A., Körner C., Freund H.:
Thermo-Mechanical Study on Auxetic Shape Memory Periodic Open Cellular Structures—Part I: Characterization of Reentrant Geometry and Effective Heat Conductivity
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202401717
Scherr R., Liepold P., Markl M., Körner C.:
A CALPHAD-Informed Enthalpy Method for Multicomponent Alloy Systems with Phase Transitions
In: Modelling 5 (2024), S. 367-391
ISSN: 2673-3951
DOI: 10.3390/modelling5010020
Schulze H., Zenk C., Körner C.:
Improving Microstructural Homogeneity of Investment-Cast Single-Crystalline Ni-Base Superalloys by Using Fluidized Carbon Bed Cooling
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202302123
Semjatov N., Wahlmann B., Körner C.:
Multiple interaction electron beam powder bed fusion for controlling melt pool dynamics and improving surface quality
In: Additive Manufacturing 90 (2024), Art.Nr.: 104316
ISSN: 2214-7810
DOI: 10.1016/j.addma.2024.104316
Sánchez Batalla B., Laube A., Hofer A., Zallmann S., Körner C., Struckmann T., Bachmann J., Weidlich C.:
Long-term performance of PEM water electrolysis cells with 3D printed electrodes and low catalyst loading
In: International Journal of Hydrogen Energy 59 (2024), S. 480-491
ISSN: 0360-3199
DOI: 10.1016/j.ijhydene.2024.01.364
Sánchez Batalla B., Laube A., Struckmann T., Hofer A., Zallmann S., Körner C., Fischer S., Burek BO., Bachmann J., Weidlich C.:
A Mild Method for the Activation of Cation Exchange Membranes Used in Tubular PEM Electrolyzers
In: ChemPlusChem 89 (2024), Art.Nr.: e202300735
ISSN: 2192-6506
DOI: 10.1002/cplu.202300735
Titz K., Vollhüter J., Randelzhofer P., Neumeier S., Göken M., Wahlmann B., Körner C.:
Design and Characterization of a Novel NiAl–(Cr,Mo) Eutectic Alloy
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202302079
Wahlmann B., Markl M., Körner C.:
A thermo-mechanical model for hot cracking susceptibility in electron beam powder bed fusion of Ni-base superalloys
In: Materials & Design 237 (2024), Art.Nr.: 112528
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2023.112528
Yang Z., Koepf JA., Markl M., Körner C.:
Effect of scanning strategies on grain structure and texture of additively manufactured lattice struts: A numerical exploration
In: Advanced Engineering Materials (2024)
ISSN: 1438-1656
DOI: 10.1002/adem.202400661
Yang Z., Markl M., Körner C.:
Comprehensive numerical investigation of laser powder bed fusion process conditions for bulk metallic glasses
In: Additive Manufacturing 81 (2024), Art.Nr.: 104026
ISSN: 2214-7810
DOI: 10.1016/j.addma.2024.104026
Ye J., Chen T., Körner C.:
Correlating outgassing and smoke phenomenon in electron beam powder bed fusion of Ti6Al4V using a residual gas analyzer
In: Progress in Additive Manufacturing (2024)
ISSN: 2363-9512
DOI: 10.1007/s40964-024-00745-3
Zallmann S., Fu Z., Körner C.:
Powder sintering kinetics during electron beam based additive manufacturing
In: Powder Technology 434 (2024), Art.Nr.: 119332
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2023.119332

Akhlaghi M., Körner C.:
Comparison between nitriding behavior of Mo-Ti and Mo-V alloys
In: International Journal of Refractory Metals & Hard Materials 112 (2023), Art.Nr.: 106126
ISSN: 0263-4368
DOI: 10.1016/j.ijrmhm.2023.106126
Baumgärtner B., Rothfelder R., Greiner S., Breuning C., Renner J., Schmidt M., Drummer D., Körner C., Markl M., Hausotte T.:
Evaluation of Additively-Manufactured Internal Geometrical Features Using X-ray-Computed Tomography
In: Journal of Manufacturing and Materials Processing (2023)
ISSN: 2504-4494
DOI: 10.3390/jmmp7030095
Breuning C., Böhm J., Markl M., Körner C.:
High-Throughput Numerical Investigation of Process Parameter-Melt Pool Relationships in Electron Beam Powder Bed Fusion
In: Modelling 4 (2023), S. 336-350
ISSN: 2673-3951
DOI: 10.3390/modelling4030019
Breuning C., Markl M., Körner C.:
A return time compensation scheme for complex geometries in electron beam powder bed fusion
In: Additive Manufacturing 76 (2023), S. 103767
ISSN: 2214-7810
DOI: 10.1016/j.addma.2023.103767
Fink A., Fu Z., Körner C.:
Functional properties and shape memory effect of Nitinol manufactured via electron beam powder bed fusion
In: Materialia 30 (2023), Art.Nr.: 101823
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2023.101823
Franke M., Arnold C., Körner C.:
In-situ quality assurance for electron-based additive manufacturing by electron optical observation
In: Progress in Additive Manufacturing 8 (2023), S. 55-60
ISSN: 2363-9512
DOI: 10.1007/s40964-022-00382-8
Förner A., Vollhüter J., Krapf A., Jamjoom AFA., Hausmann D., Wahlmann B., Fu Z., Körner C., Neumeier S., Göken M.:
Using Selective Electron Beam Melting to Enhance the High-Temperature Strength and Creep Resistance of NiAl–28Cr–6Mo In Situ Composites
In: Advanced Engineering Materials (2023)
ISSN: 1438-1656
DOI: 10.1002/adem.202300407
Knörlein J., Franke MM., Schloffer M., Berger T., Körner C.:
Microstructure and mechanical properties of additively manufactured γ-TiAl with dual microstructure
In: Intermetallics 161 (2023), Art.Nr.: 107978
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2023.107978
Koepf JA., Gotterbarm M., Kumara C., Markl M., Körner C.:
Alternative Approach to Modeling of Nucleation and Remelting in Powder Bed Fusion Additive Manufacturing
In: Advanced Engineering Materials (2023)
ISSN: 1438-1656
DOI: 10.1002/adem.202201682
König HH., Semjatov N., Spartacus G., Bidola P., Ioannidou C., Ye J., Renner J., Lienert U., Abreu-Faria G., Wahlmann B., Wildheim M., Ackelid U., Beckmann F., Staron P., Hedström P., Körner C., Lindwall G.:
MiniMelt: An instrument for real-time tracking of electron beam additive manufacturing using synchrotron x-ray techniques
In: Review of Scientific Instruments 94 (2023)
ISSN: 0034-6748
DOI: 10.1063/5.0177255
Laube A., Sánchez Batalla B., Weidlich C., Hofer A., Bachmann J., Zallmann S., Körner C., Fischer S., Chica A., Struckmann T.:
Tubular PEM electrolysis cells with a 3D-printed oxygen electrode and ALD catalyst coating
In: International Journal of Hydrogen Energy 49 (2023), S. 437-448
ISSN: 0360-3199
DOI: 10.1016/j.ijhydene.2023.08.084
Mergheim J., Breuning C., Burkhardt C., Hübner D., Köpf J., Herrnböck L., Yang Z., Körner C., Markl M., Steinmann P., Stingl M.:
Additive manufacturing of cellular structures: Multiscale simulation and optimization
In: Journal of Manufacturing Processes 95 (2023), S. 275-290
ISSN: 1526-6125
DOI: 10.1016/j.jmapro.2023.03.071
Morales LA., Bezold A., Förner A., Holz H., Merle B., Neumeier S., Körner C., Zenk C.:
Influence of Cu Addition and Microstructural Configuration on the Creep Resistance and Mechanical Properties of an Fe-Based alpha/alpha '/alpha '' Superalloy
In: Advanced Engineering Materials (2023)
ISSN: 1438-1656
DOI: 10.1002/adem.202201652
Nahr F., Rasch M., Burkhardt C., Renner J., Baumgärtner B., Hausotte T., Körner C., Steinmann P., Mergheim J., Schmidt M., Markl M.:
Geometrical Influence on Material Properties for Ti6Al4V Parts in Powder Bed Fusion
In: Journal of Manufacturing and Materials Processing 7 (2023), S. 82
ISSN: 2504-4494
DOI: 10.3390/jmmp7030082
Reith M., Franke M., Körner C.:
Impact of the acceleration voltage on the processing of γ-TiAl via electron beam powder bed fusion
In: Progress in Additive Manufacturing (2023)
ISSN: 2363-9512
DOI: 10.1007/s40964-023-00499-4
Reith M., Franke M., Körner C.:
Robust γ-TiAl Dual Microstructure Concept by Advanced Electron Beam Powder Bed Fusion Technology
In: Crystals 13 (2023), Art.Nr.: 1348
ISSN: 2073-4352
DOI: 10.3390/cryst13091348
Renner J., Grund J., Markl M., Körner C.:
A Ray Tracing Model for Electron Optical Imaging in Electron Beam Powder Bed Fusion
In: Journal of Manufacturing and Materials Processing 7 (2023), Art.Nr.: 87
ISSN: 2504-4494
DOI: 10.3390/jmmp7030087
Scherr R., Markl M., Körner C.:
Volume of fluid based modeling of thermocapillary flow applied to a free surface lattice Boltzmann method
In: Journal of Computational Physics 492 (2023), Art.Nr.: 112441
ISSN: 0021-9991
DOI: 10.1016/j.jcp.2023.112441
Uddagiri M., Shchyglo O., Steinbach I., Wahlmann B., Körner C.:
Phase-Field Study of the History-Effect of Remelted Microstructures on Nucleation During Additive Manufacturing of Ni-Based Superalloys
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2023)
ISSN: 1073-5623
DOI: 10.1007/s11661-023-07004-0
Vaghela R., Arkudas A., Gage D., Körner C., von Hörsten S., Salehi S., Horch RE., Hessenauer M.:
A Novel Window into Angiogenesis — Intravital Microscopy in the AV-Loop-Model
In: Cells 12 (2023), Art.Nr.: 261
ISSN: 2073-4409
DOI: 10.3390/cells12020261
Vetter J., Beneder S., Kandler M., Feyer F., Körner C., Schmidt M.:
Impact of Particle Size Distribution in the Preform on Thermal Conductivity, Vickers Hardness and Tensile Strength of Copper-Infiltrated AISI H11 Tool Steel
In: Materials 16 (2023), S. 2659
ISSN: 1996-1944
DOI: 10.3390/ma16072659
Wahlmann B., Markl M., Körner C.:
A Thermo-Mechanical Model for Hot Cracking Susceptibility in Electron Beam Powder Bed Fusion of Ni-Base Superalloys
In: Materials & Design 237 (2023), S. 112528
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2023.112528
Yang J., Fu Z., Körner C.:
Structure Design of Soft Magnetic Materials using Electron Beam‐based Additive Manufacturing
In: Advanced Materials (2023)
ISSN: 0935-9648
DOI: 10.1002/adma.202300837
Yang J., Fu Z., Wahl L., Travitzky N., Körner C.:
Correlation Between Structural Features and Magnetic Performance of Fe93.5Si6.5 (wt.%) Soft Magnetic Materials
In: Advanced Functional Materials (2023)
ISSN: 1616-301X
DOI: 10.1002/adfm.202308194
Yang Z., Huber F., Krapf A., Merle B., Markl M., Schmidt M., Körner C.:
Revealing bulk metallic glass crystallization kinetics during laser powder bed fusion by a combination of experimental and numerical methods
In: Journal of Non-Crystalline Solids 619 (2023), Art.Nr.: 122532
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2023.122532
Yang Z., Kuesters Y., Logvinov R., Markl M., Körner C.:
SAMPLE3D: A versatile numerical tool for investigating texture and grain structure of materials processed by PBF processes
IVth International Conference on Simulation for Additive Manufacturing (Sim-AM 2023) (München, 26. Juli 2023 - 28. Juli 2023)
DOI: 10.23967/c.simam.2023.006
Ye J., Renner J., Körner C., Fu Z.:
Electron-optical observation of smoke evolution during electron beam powder bed fusion
In: Additive Manufacturing 70 (2023), Art.Nr.: 103578
ISSN: 2214-7810
DOI: 10.1016/j.addma.2023.103578

Akhlaghi M., Hock R., Dallmann J., Krapf A., Merle B., Hofsäss H., Körner C., Leineweber A.:
Gaseous nitriding of Co-10 at% and -15 at% Cr alloys at 400 °C and 450 °C
In: Journal of Alloys and Compounds 907 (2022)
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2022.164535
Arnold C., Körner C.:
Electron-optical in-situ metrology for electron beam powder bed fusion: calibration and validation
In: Measurement Science & Technology 33 (2022), Art.Nr.: 014001
ISSN: 0957-0233
DOI: 10.1088/1361-6501/ac2d5c
Bortoluci Ormastroni LM., Lopez-Galilea I., Pistor J., Ruttert B., Körner C., Theisen W., Villechaise P., Pedraza F., Cormier J.:
Very high cycle fatigue durability of an additively manufactured single-crystal Ni-based superalloy
In: Additive Manufacturing 54 (2022), Art.Nr.: 102759
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.102759
Breuning C., Pistor J., Markl M., Körner C.:
Basic Mechanism of Surface Topography Evolution in Electron Beam Based Additive Manufacturing
In: Materials 15 (2022), Art.Nr.: 4754
ISSN: 1996-1944
DOI: 10.3390/ma15144754
Bäreis J., Semjatov N., Renner J., Ye J., Fu Z., Körner C.:
Electron-optical in-situ crack monitoring during electron beam powder bed fusion of the Ni-Base superalloy CMSX-4
In: Progress in Additive Manufacturing (2022)
ISSN: 2363-9512
DOI: 10.1007/s40964-022-00357-9
Fiegl T., Franke M., Körner C.:
Correlation of powder degradation, energy absorption and gas pore formation in laser-based powder bed fusion process of AlSi10Mg0.4
In: Additive Manufacturing 56 (2022)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.102917
Fu Z., Körner C.:
Actual state-of-the-art of electron beam powder bed fusion
In: European Journal of Materials 2 (2022), S. 54-116
ISSN: 2688-9277
DOI: 10.1080/26889277.2022.2040342
Fu Z., Ye J., Franke M., Körner C.:
A novel approach for powder bed-based additive manufacturing of compositionally graded composites
In: Additive Manufacturing 56 (2022), Art.Nr.: 102916
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.102916
Galgon F., Melzer D., Zenk C., Dzugan J., Körner C.:
Miniature mechanical testing of LMD-fabricated compositionally & microstructurally graded γ titanium aluminides
In: Journal of Materials Research (2022)
ISSN: 0884-2914
DOI: 10.1557/s43578-022-00801-0
Git P., Hofmeister M., Singer R., Körner C.:
Fluidization behavior of graphitized glassy particles in a fluidized carbon bed cooling process for investment casting
In: Particuology 65 (2022), S. 32-38
ISSN: 1674-2001
DOI: 10.1016/j.partic.2021.07.001
Himmler D., Randelzhofer P., Körner C.:
In-situ Al3Ti particle reinforcement for stiff aluminum die castings
In: Journal of Alloys and Compounds (2022), Art.Nr.: 163984
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2022.163984
Hofer A., Wachter S., Döhler D., Laube A., Sánchez Batalla B., Fu Z., Weidlich C., Struckmann T., Körner C., Bachmann J.:
Practically applicable water oxidation electrodes from 3D-printed Ti6Al4V scaffolds with surface nanostructuration and iridium catalyst coating
In: Electrochimica Acta 417 (2022), S. 140308
ISSN: 0013-4686
DOI: 10.1016/j.electacta.2022.140308
Ioannidou C., König HH., Semjatov N., Ackelid U., Staron P., Körner C., Hedström P., Lindwall G.:
In-situ synchrotron X-ray analysis of metal Additive Manufacturing: Current state, opportunities and challenges
In: Materials and Design 219 (2022), Art.Nr.: 110790
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2022.110790
Knoerlein J., Franke MM., Schloffer M., Körner C.:
In-situ aluminum control for titanium aluminide via electron beam powder bed fusion to realize a dual microstructure
In: Additive Manufacturing 59 (2022)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.103132
Kotzem D., Teschke M., Jüchter V., Körner C., Walther F.:
Microstructure analysis and mechanical properties of electron beam powder bed fusion (PBF-EB)-manufactured gamma-titanium aluminide (TiAl) at elevated temperatures
In: MP Materials Testing 64 (2022), S. 636-646
ISSN: 0025-5300
DOI: 10.1515/mt-2021-2137
Krohmer E., Schmeiser F., Wahlmann B., Rosigkeit J., Graf G., Spoerk-Erdely P., Clemens H., Staron P., Körner C., Reimers W., Uhlmann E.:
Revealing dynamic processes in laser powder bed fusion with in situ X-ray diffraction at PETRA III
In: Review of Scientific Instruments 93 (2022)
ISSN: 0034-6748
DOI: 10.1063/5.0077105
Luo N., Galgon F., Krauß S., Morales LA., Merle B., Zenk C., Körner C.:
Microstructural evolution and mechanical properties in Zr–Cu–Al–Nb bulk metallic glass composites prepared by laser metal deposition
In: Intermetallics 140 (2022), Art.Nr.: 107393
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2021.107393
Luo N., Huber F., Ciftci N., Wahl L., Bezold A., Neumeier S., Uhlenwinkel V., Travitzky N., Schmidt M., Zenk C., Körner C.:
Laser powder bed fusion of FeCoBSiNb-Cu bulk metallic glass composites: Processing, microstructure and mechanical properties
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 849 (2022), Art.Nr.: 143405
ISSN: 0921-5093
DOI: 10.1016/j.msea.2022.143405
Morales Victoria L., Luo N., Li K., Zenk C., Körner C.:
On stabilizing an α/α′/α″ microstructure in ferritic superalloys
In: Journal of Alloys and Compounds 911 (2022), Art.Nr.: 164996
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2022.164996
Pistor J., Hagen S., Virtanen S., Körner C.:
Influence of the microstructural homogeneity on the high-temperature oxidation behavior of a single crystalline Ni-base superalloy
In: Scripta Materialia 207 (2022), Art.Nr.: 114301
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2021.114301
Poller MJ., Renz C., Wolf T., Körner C., Wasserscheid P., Albert J.:
3D-Printed Raney-Cu POCS as Promising New Catalysts for Methanol Synthesis
In: Catalysts 12 (2022)
ISSN: 2073-4344
DOI: 10.3390/catal12101288
Reith M., Breuning C., Franke M., Körner C.:
Impact of the Power-Dependent Beam Diameter during Electron Beam Additive Manufacturing: A Case Study with γ-TiAl
In: Applied Sciences 12 (2022), Art.Nr.: 11300
ISSN: 2076-3417
DOI: 10.3390/app122111300
Renner J., Breuning C., Markl M., Körner C.:
Surface topographies from electron optical images in electron beam powder bed fusion for process monitoring and control
In: Additive Manufacturing 60 (2022), Art.Nr.: 103172
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.103172
Steiner D., Reinhardt L., Fischer L., Popp V., Körner C., Geppert CI., Bäuerle T., Horch RE., Arkudas A.:
Impact of Endothelial Progenitor Cells in the Vascularization of Osteogenic Scaffolds
In: Cells 11 (2022), Art.Nr.: 926
ISSN: 2073-4409
DOI: 10.3390/cells11060926
Vaghela R., Arkudas A., Gage D., Körner C., Von Hoersten S., Salehi S., Horch RE., Hessenauer M.:
Microvascular development in the rat arteriovenous loop model in vivo-A step by step intravital microscopy analysis
In: Journal of Biomedical Materials Research Part A (2022)
ISSN: 1549-3296
DOI: 10.1002/jbm.a.37395
Vetter J., Huber F., Wachter S., Körner C., Schmidt M.:
Development of a Material Extrusion Additive Manufacturing Process of 1.2083 steel comprising FFF Printing, Solvent and Thermal Debinding and Sintering
21st CIRP Conference on Electro Physical and Chemical Machining, CIRP ISEM XXI 2022 (Zurich, 14. Juni 2022 - 16. Juni 2022)
In: Procedia CIRP 2022
DOI: 10.1016/j.procir.2022.09.140
Wahlmann B., Bandorf J., Volz N., Förner A., Pröbstle J., Multerer K., Göken M., Markl M., Neumeier S., Körner C.:
Numerical Design of CoNi-Base Superalloys With Improved Casting Structure
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2022)
ISSN: 1073-5623
DOI: 10.1007/s11661-022-06870-4
Yang J., Fu Z., Ye J., Kübrich D., Körner C.:
Electron beam-based additive manufacturing of Fe93.5Si6.5 (wt.%) soft magnetic material with controllable magnetic performance
In: Scripta Materialia 210 (2022), Art.Nr.: 114460
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2021.114460
Yang Z., Markl M., Körner C.:
Predictive simulation of bulk metallic glass crystallization during laser powder bed fusion
In: Additive Manufacturing 59 (2022), Art.Nr.: 103121
ISSN: 2214-7810
DOI: 10.1016/j.addma.2022.103121
Yang Z., Wang H., Krauß S., Huber F., Merle B., Schmidt M., Markl M., Körner C.:
Evolution of an industrial-grade Zr-based bulk metallic glass during multiple laser beam melting
In: Journal of Non-Crystalline Solids 589 (2022), Art.Nr.: 121649
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2022.121649

Akhlaghi M., Martin S., Dallmann J., Hock R., Körner C., Leineweber A.:
Anisotropic nitriding behavior upon formation of expanded hcp in Co-Cr alloys
In: Scripta Materialia 203 (2021)
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2021.114041
Arnold C., Breuning C., Körner C.:
Electron-Optical In Situ Imaging for the Assessment of Accuracy in Electron Beam Powder Bed Fusion
In: Materials 14 (2021), Art.Nr.: 7240
ISSN: 1996-1944
DOI: 10.3390/ma14237240
Arnold C., Körner C.:
In-situ electron optical measurement of thermal expansion in electron beam powder bed fusion
In: Additive Manufacturing 46 (2021)
ISSN: 2214-7810
DOI: 10.1016/j.addma.2021.102213
Breuning C., Arnold C., Markl M., Körner C.:
A multivariate meltpool stability criterion for fabrication of complex geometries in electron beam powder bed fusion
In: Additive Manufacturing 45 (2021), Art.Nr.: 102051
ISSN: 2214-7810
DOI: 10.1016/j.addma.2021.102051
Fiegl T., Franke M., Raza A., Hryha E., Körner C.:
Effect of AlSi10Mg0.4 long-term reused powder in PBF-LB/M on the mechanical properties
In: Materials & Design 212 (2021), Art.Nr.: 110176
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110176
Gaag T., Ritter N., Peters A., Volz N., Gruber D., Neumeier S., Zenk C., Körner C.:
Improving the Effectiveness of the Solid-Solution-Strengthening Elements Mo, Re, Ru and W in Single-Crystalline Nickel-Based Superalloys
In: Metals 11 (2021), Art.Nr.: 1707
ISSN: 2075-4701
DOI: 10.3390/met11111707
Hessenauer M., Vaghela R., Körner C., Von Horsten S., Pobel C., Gage D., Muller C., Salehi S., Horch RE., Arkudas A.:
Watching the Vessels Grow: Establishment of Intravital Microscopy in the Arteriovenous Loop Rat Model
In: Tissue Engineering - Part C: Methods 27 (2021), S. 357-365
ISSN: 1937-3384
DOI: 10.1089/ten.tec.2021.0024
Horst OM., Schmitz D., Schreuer J., Git P., Wang H., Körner C., Eggeler G.:
Thermoelastic properties and γ’-solvus temperatures of single-crystal Ni-base superalloys
In: Journal of Materials Science (2021)
ISSN: 0022-2461
DOI: 10.1007/s10853-020-05628-w
Kengelbach-Weigand A., Thielen C., Bäuerle T., Götzl R., Gerber T., Körner C., Beier J., Horch RE., Boos A.:
Personalized medicine for reconstruction of critical-size bone defects – a translational approach with customizable vascularized bone tissue
In: npj Regenerative Medicine 6 (2021), Art.Nr.: 49
ISSN: 2057-3995
DOI: 10.1038/s41536-021-00158-8
Kergaßner A., Köpf J., Markl M., Körner C., Mergheim J., Steinmann P.:
A Novel Approach to Predict the Process-Induced Mechanical Behavior of Additively Manufactured Materials
In: Journal of Materials Engineering and Performance (2021)
ISSN: 1059-9495
DOI: 10.1007/s11665-021-05725-0
Küng V., Scherr R., Markl M., Körner C.:
Multi-material model for the simulation of powder bed fusion additive manufacturing
In: Computational Materials Science 194 (2021)
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2021.110415
Leijon F., Wachter S., Fu Z., Körner C., Skjervold S., Moverare J.:
A novel rapid alloy development method towards powder bed additive manufacturing, demonstrated for binary Al-Ti, -Zr and -Nb alloys
In: Materials & Design 211 (2021)
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110129
Pistor J., Körner C.:
A novel mechanism to generate metallic single crystals
In: Scientific Reports 11 (2021)
ISSN: 2045-2322
DOI: 10.1038/s41598-021-04235-2
Rausch A., Pistor J., Breuning C., Markl M., Körner C.:
New grain formation mechanisms during powder bed fusion
In: Materials 14 (2021), Art.Nr.: 3324
ISSN: 1996-1944
DOI: 10.3390/ma14123324
Raza A., Fiegl T., Hanif I., Markström A., Franke M., Körner C., Hryha E.:
Degradation of AlSi10Mg powder during laser based powder bed fusion processing
In: Materials and Design 198 (2021), Art.Nr.: 109358
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2020.109358
Rottensteiner-Brandl U., Bertram U., Lingens L., Köhn K., Distel L., Fey T., Körner C., Horch RE., Arkudas A.:
Free Transplantation of a Tissue Engineered Bone Graft into an Irradiated, Critical-Size Femoral Defect in Rats
In: Cells 10 (2021)
ISSN: 2073-4409
DOI: 10.3390/cells10092256
Roux LL., Liu C., Ji Z., Kerfriden P., Gage D., Feyer F., Körner C., Bigot S.:
Automatised quality assessment in additive layer manufacturing using layer-by-layer surface measurements and deep learning
14th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME 2020 (Naples, ITA, 15. Juli 2020 - 17. Juli 2020)
In: Roberto Teti, Doriana M. D'Addona (Hrsg.): Procedia CIRP 2021
DOI: 10.1016/j.procir.2021.03.050
Sommerschuh M., Wirth J., Englisch S., Przybilla T., Apeleo Zubiri B., Pistor J., Merle B., Körner C., Göken M., Spiecker E.:
A scale-bridging study of the influence of TCP phases on the mechanical properties of an additive manufactured Ni-base superalloy combining microcompression testing, X-ray nanotomography and TEM
In: Microscopy and Microanalysis 27 (2021), S. 938-942
ISSN: 1431-9276
DOI: 10.1017/S1431927621003603
Trudonoshyn O., Randelzhofer P., Körner C.:
Heat treatment of high-pressure die casting Al-Mg-Si-Mn-Zn alloys
In: Journal of Alloys and Compounds (2021)
ISSN: 0925-8388
DOI: 10.1016/j.jallcom.2021.159692
Wahlmann B., Krohmer E., Breuning C., Schell N., Staron P., Uhlmann E., Körner C.:
In‐situ Observation of γ' Phase Transformation Dynamics during Selective Laser Melting of CMSX‐4
In: Advanced Engineering Materials (2021)
ISSN: 1438-1656
DOI: 10.1002/adem.202100112
Wahlmann B., Körner C., Nunn M.:
Electron Beam Wire Cladding of Nickel Alloys and Stainless Steel on a Reactor Pressure Vessel Steel
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2021)
ISSN: 0921-5093
DOI: 10.1016/j.msea.2021.141082
Wahlmann B., Leidel D., Markl M., Körner C.:
Numerical Alloy Development for Additive Manufacturing towards Reduced Cracking Susceptibility
In: Crystals 11 (2021)
ISSN: 2073-4352
DOI: 10.3390/cryst11080902
Wimler D., Käsznar K., Musi M., Breuning C., Markl M., Keckes J., Clemens H., Körner C., Mayer S.:
How electron beam melting tailors the Al-sensitive microstructure and mechanical response of a novel process-adapted γ-TiAl based alloy
In: Materials & Design 212 (2021), Art.Nr.: 110187
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110187
Wormser M., Kiefer DA., Rupitsch S., Körner C.:
Comparison of Transmission Measurement Methods of Elastic Waves in Phononic Band Gap Materials
In: Materials (2021)
ISSN: 1996-1944
DOI: 10.3390/ma14051133
Yang Z., Al-Mukadam R., Stolpe M., Markl M., Deubener J., Körner C.:
Isothermal crystallization kinetics of an industrial-grade Zr-based bulk metallic glass
In: Journal of Non-Crystalline Solids 573 (2021), Art.Nr.: 121145
ISSN: 0022-3093
DOI: 10.1016/j.jnoncrysol.2021.121145
Yang Z., Bauereiß A., Markl M., Körner C.:
Modeling laser beam absorption of metal alloys at high temperatures for selective laser melting
In: Advanced Engineering Materials 23 (2021), Art.Nr.: 2100137
ISSN: 1438-1656
DOI: 10.1002/adem.202100137

Adler L., Fu Z., Körner C.:
Electron beam based additive manufacturing of Fe3Al based iron aluminides – Processing window, microstructure and properties
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 785 (2020), Art.Nr.: 139369
ISSN: 0921-5093
DOI: 10.1016/j.msea.2020.139369
Bieske J., Franke M., Schloffer M., Körner C.:
Microstructure and properties of TiAl processed via an electron beam powder bed fusion capsule technology
In: Intermetallics 126 (2020), Art.Nr.: 106929
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2020.106929
Förner A., Giese S., Arnold C., Felfer P., Körner C., Neumeier S., Göken M.:
Nanoscaled eutectic NiAl-(Cr,Mo) composites with exceptional mechanical properties processed by electron beam melting
In: Scientific Reports 10 (2020), Art.Nr.: 15153
ISSN: 2045-2322
DOI: 10.1038/s41598-020-72093-5
Gotterbarm M., Rausch A., Körner C.:
Fabrication of Single Crystals through a µ-Helix Grain Selection Process during Electron Beam Metal Additive Manufacturing
In: Metals (2020)
ISSN: 2075-4701
DOI: 10.3390/met10030313
Gotterbarm M., Seifi M., Melzer D., Džugan J., Salem AA., Liu ZH., Körner C.:
Small scale testing of IN718 single crystals manufactured by EB-PBF
In: Additive Manufacturing 36 (2020), Art.Nr.: 101449
ISSN: 2214-7810
DOI: 10.1016/j.addma.2020.101449
Guschlbauer R., Burkhardt AK., Fu Z., Körner C.:
Effect of the oxygen content of pure copper powder on selective electron beam melting
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 779 (2020), Art.Nr.: 139106
ISSN: 0921-5093
DOI: 10.1016/j.msea.2020.139106
Heinl M., Greiner S., Wudy K., Pobel C., Rasch M., Huber F., Papke T., Merklein M., Schmidt M., Körner C., Drummer D., Hausotte T.:
Measuring procedures for surface evaluation of additively manufactured powder bed based polymer and metal parts
In: Measurement Science and Technology 31 (2020), S. 1-14
ISSN: 1361-6501
DOI: 10.1088/1361-6501/ab89e2
Heßelmann C., Wolf T., Galgon F., Körner C., Albert J., Wasserscheid P.:
Additively manufactured Raney-type Copper catalyst for methanol synthesis
In: Catalysis: Science and Technology 10 (2020), S. 164-168
ISSN: 2044-4753
DOI: 10.1039/C9CY01657K
Himmler D., Randelzhofer P., Körner C.:
Formation kinetics and phase stability of in-situ Al3Ti particles in aluminium casting alloys with varying Si content
In: Results in Materials (2020)
ISSN: 2590-048X
DOI: 10.1016/j.rinma.2020.100103
Horst OM., Adler D., Git P., Wang H., Streitberger J., Holtkamp M., Jöns N., Singer R., Körner C., Eggeler G.:
Exploring the fundamentals of Ni-based superalloy single crystal (SX) alloy design: Chemical composition vs. microstructure
In: Materials & Design 195 (2020), Art.Nr.: 108976
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.108976
Horst OM., Ibrahimkhel S., Streitberger J., Wochmjakow N., Git P., Scholz F., Thome P., Singer R., Körner C., Frenzel J., Eggeler G.:
On the Influence of Alloy Composition on Creep Behavior of Ni-Based Single-Crystal Superalloys (SXs)
14th International Symposium on Superalloys, Superalloys 2021 (Seven Springs, PA, 12. September 2021 - 16. September 2021)
In: Sammy Tin, Mark Hardy, Justin Clews, Jonathan Cormier, Qiang Feng, John Marcin, Chris O'Brien, Akane Suzuki (Hrsg.): Minerals, Metals and Materials Series 2020
DOI: 10.1007/978-3-030-51834-9_6
Körner C., Markl M., Koepf JA.:
Modeling and Simulation of Microstructure Evolution for Additive Manufacturing of Metals: A Critical Review
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
ISSN: 1073-5623
DOI: 10.1007/s11661-020-05946-3
Liu C., Le Roux L., Körner C., Tabaste O., Lacan F., Bigot S.:
Digital Twin-enabled Collaborative Data Management for Metal Additive Manufacturing Systems
In: Journal of Manufacturing Systems (2020)
ISSN: 0278-6125
DOI: 10.1016/j.jmsy.2020.05.010
Luo N., Scheitler CJ., Ciftci N., Galgon F., Fu Z., Uhlenwinkel V., Schmidt M., Körner C.:
Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties
In: Materials Characterization 162 (2020), Art.Nr.: 110206
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2020.110206
Prach O., Trudonoshyn O., Randelzhofer P., Körner C., Durst K.:
Multi-alloying effect of Sc, Zr, Cr on the Al-Mg-Si-Mn high-pressure die casting alloys
In: Materials Characterization 168 (2020)
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2020.110537
Rausch A., Gotterbarm M., Pistor J., Markl M., Körner C.:
New grain formation by constitutional undercooling due to remelting of segregated microstructures during powder bed fusion
In: Materials 13 (2020), S. 1-14
ISSN: 1996-1944
DOI: 10.3390/ma13235517
Reith M., Franke M., Schloffer M., Körner C.:
Processing 4th generation titanium aluminides via electron beam based additive manufacturing – characterization of microstructure and mechanical properties
In: Materialia 14 (2020), Art.Nr.: 100902
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2020.100902
Sheng N., Meyer A., Horke K., Körner C., Singer R.:
Secondary Recrystallization of Nickel-Base Superalloy CM 247 LC After Processing by Metal Injection Molding
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2020)
ISSN: 1073-5623
DOI: 10.1007/s11661-020-06087-3
Trudonoshyn O., Prach O., Randelzhofer P., Durst K., Körner C.:
Heat treatment of the new high-strength high-ductility Al–Mg–Si–Mn alloys with Sc, Zr and Cr additions
In: Materialia 15 (2020), Art.Nr.: 100981
ISSN: 2589-1529
DOI: 10.1016/j.mtla.2020.100981
Winkler S., Mutschall H., Biggemann J., Fey T., Greil P., Körner C., Weisbach VG., Meyer-Lindenberg A., Arkudas A., Horch RE., Steiner D.:
Human Umbilical Vein Endothelial Cell Support Bone Formation of Adipose-Derived Stem Cell-Loaded and 3D-Printed Osteogenic Matrices in the Arteriovenous Loop Model
In: Tissue Engineering - Part A (2020)
ISSN: 1937-335X
DOI: 10.1089/ten.tea.2020.0087
Wolf T., Fu Z., Ye J., Heßelmann C., Pistor J., Albert J., Wasserscheid P., Körner C.:
Periodic open cellular Raney-Copper-Catalysts fabricated via selective electron beam melting
In: Advanced Engineering Materials (2020)
ISSN: 1438-1656
DOI: 10.1002/adem.201901524
Zeng Y., Himmler D., Randelzhofer P., Körner C.:
Processing of in situ Al3Ti/Al composites by advanced high shear technology: influence of mixing speed
In: International Journal of Advanced Manufacturing Technology 110 (2020), S. 1589-1599
ISSN: 0268-3768
DOI: 10.1007/s00170-020-05956-w

Arnold C., Böhm J., Körner C.:
In Operando Monitoring by Analysis of Backscattered Electrons during Electron Beam Melting
In: Advanced Engineering Materials 22 (2019), Art.Nr.: 1901102
ISSN: 1438-1656
DOI: 10.1002/adem.201901102
Bürger D., Parsa AB., Ramsperger M., Körner C., Eggeler G.:
Creep properties of single crystal Ni-base superalloys (SX): A comparison between conventionally cast and additive manufactured CMSX-4 materials
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 762 (2019), Art.Nr.: 138098
ISSN: 0921-5093
DOI: 10.1016/j.msea.2019.138098
Fiegl T., Franke M., Körner C.:
Impact of build envelope on the properties of additive manufactured parts from AlSi10Mg
In: Optics and Laser Technology 111 (2019), S. 51-57
ISSN: 0030-3992
DOI: 10.1016/j.optlastec.2018.08.050
Heßelmann C., Wolf T., Körner C., Albert J., Wasserscheid P.:
Additive manufacturing meets reaction engineering - Novel Raney® copper catalyst structures for methanol synthesis
2019 DGMK International Conference on Circular Economy - A Fresh View on Petrochemistry (Dresden, DEU, 9. Oktober 2019 - 11. Oktober 2019)
In: H. Blanke, H. Hager, A. Jess, J. A. Lercher, M. Marchionna, D. Vogt, M. Bender (Hrsg.): DGMK Tagungsbericht 2019
Köpf J., Soldner D., Ramsperger M., Mergheim J., Markl M., Körner C.:
Numerical microstructure prediction by a coupled finite element cellular automaton model for selective electron beam melting
In: Computational Materials Science 162 (2019), S. 148-155
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2019.03.004
Lomakin K., Guschlbauer R., Osmanlic F., Fu Z., Sippel M., Helmreich K., Körner C., Vossiek M., Gold G.:
3D Printed Copper Waveguides by Selective Electron Beam Melting Process for E-Band
EuMW 2019 (Paris)
DOI: 10.23919/EuMC.2019.8910893
Markl M., Rausch A., Küng V., Körner C.:
SAMPLE: A Software Suite to Predict Consolidation and Microstructure for Powder Bed Fusion Additive Manufacturing
In: Advanced Engineering Materials (2019), Art.Nr.: 1901270
ISSN: 1438-1656
DOI: 10.1002/adem.201901270
Meid C., Dennstedt A., Ramsperger M., Pistor J., Ruttert B., Lopez-Galilea I., Theisen W., Körner C., Bartsch M.:
Effect of heat treatment on the high temperature fatigue life of single crystalline nickel base superalloy additively manufactured by means of selective electron beam melting
In: Scripta Materialia 168 (2019), S. 124-128
ISSN: 1359-6462
DOI: 10.1016/j.scriptamat.2019.05.002
Müller A., Roslyakova I., Sprenger M., Git P., Rettig R., Markl M., Körner C., Singer R.:
MultOpt++: a fast regression-based model for the development of compositions with high robustness against scatter of element concentrations
In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
ISSN: 0965-0393
DOI: 10.1088/1361-651X/aaf0b8
Müller A., Sprenger M., Ritter N., Rettig R., Markl M., Körner C., Singer R.:
MultOpt++: a fast regression-based model for the constraint violation fraction due to composition uncertainties
In: Modelling and Simulation in Materials Science and Engineering 27 (2019)
ISSN: 0965-0393
DOI: 10.1088/1361-651X/aaf01e
Pistor J., Körner C.:
Formation of topologically closed packed phases within CMSX-4 single crystals produced by additive manufacturing
In: Materials Letters 1 (2019)
ISSN: 0167-577X
DOI: 10.1016/j.mlblux.2019.100003
Pobel C., Arnold C., Osmanlic F., Fu Z., Körner C.:
Immediate development of processing windows for selective electron beam melting using layerwise monitoring via backscattered electron detection
In: Materials Letters 249 (2019), S. 70 - 72
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2019.03.048
Pobel C., Osmanlic F., Lodes M., Wachter S., Körner C.:
Processing windows for Ti-6Al-4V fabricated by selective electron beam melting with improved beam focus and different scan line spacings
In: Rapid Prototyping Journal 25 (2019), S. 665-671
ISSN: 1355-2546
DOI: 10.1108/RPJ-04-2018-0084
Pobel C., Reichel S., Fu Z., Osmanlic F., Körner C.:
Advanced process strategy to realize microducts free of powder using selective electron beam melting
In: International Journal of Advanced Manufacturing Technology (2019)
ISSN: 0268-3768
DOI: 10.1007/s00170-019-03615-3
Prach O., Trudonoshyn O., Randelzhofer P., Körner C., Durst K.:
Effect of Zr, Cr and Sc on the Al–Mg–Si–Mn high-pressure die casting alloys
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing (2019)
ISSN: 0921-5093
DOI: 10.1016/j.msea.2019.05.038
Rasch M., Heberle J., Dechet M., Bartels D., Gotterbarm M., Klein L., Gorunov A., Schmidt J., Körner C., Peukert W., Schmidt M.:
Grain Structure Evolution of Al–Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties
In: Materials 13 (2019)
ISSN: 1996-1944
DOI: 10.3390/ma13010082
Trudonoshyn O., Rehm S., Randelzhofer P., Körner C.:
Improvement of the high-pressure die casting alloy Al-5.7Mg-2.6Si-0.7Mn with Zn addition
In: Materials Characterization 158 (2019)
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2019.109959
Wahlmann B., Galgon F., Stark A., Gayer S., Schell N., Staron P., Körner C.:
Growth and coarsening kinetics of gamma prime precipitates in CMSX-4 under simulated additive manufacturing conditions
In: Acta Materialia (2019)
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2019.08.049
Wedler J., Körner C.:
Sensor-based Observation and Numerical Simulation of Mold Filling During High Pressure Die Casting
In: Giesserei (2019), S. 18-25
ISSN: 0016-9765
Wolf T., Fu Z., Körner C.:
Selective electron beam melting of an aluminum bronze: Microstructure and mechanical properties
In: Materials Letters 238 (2019), S. 241-244
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2018.12.015
Zeng Y., Himmler D., Randelzhofer P., Körner C.:
In situ Al3Ti/Al composites fabricated by high shear technology: microstructure and mechanical properties
In: Materials Science and Technology 35 (2019), S. 2294-2303
ISSN: 0267-0836
DOI: 10.1080/02670836.2019.1677025

Arnold C., Pobel C., Osmanlic F., Körner C.:
Layerwise monitoring of electron beam melting via backscatter electron detection
In: Rapid Prototyping Journal 24 (2018), S. 1401 - 1406
ISSN: 1355-2546
DOI: 10.1108/RPJ-02-2018-0034
Guschlbauer R., Momeni S., Osmanlic F., Körner C.:
Process development of 99.95% pure copper processed via selective electron beam melting and its mechanical and physical properties
In: Materials Characterization (2018)
ISSN: 1044-5803
DOI: 10.1016/j.matchar.2018.04.009
Hübner D., Gotterbarm M., Kergaßner A., Köpf J., Pobel C., Markl M., Mergheim J., Steinmann P., Körner C., Stingl M.:
Topology Optimization in Additive Manufacturing Considering the Grain Structure of Inconel 718 using Numerical Homogenization
iCAT 2018 (Maribor, 10. Oktober 2018 - 11. Oktober 2018)
In: Proceedings of 7th International Conference on Additive Technologies 2018
Jüchter V., Franke M., Merenda T., Stich A., Körner C., Singer R.:
Additive manufacturing of Ti-45Al-4Nb-C by selective electron beam melting for automotive applications
In: Additive Manufacturing 22 (2018), S. 118-126
ISSN: 2214-7810
DOI: 10.1016/j.addma.2018.05.008
Köpf J., Gotterbarm M., Markl M., Körner C.:
3D multi-layer grain structure simulation of powder bed fusion additive manufacturing
In: Acta Materialia 152 (2018), S. 119-126
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2018.04.030
Köpf J., Rasch M., Meyer A., Markl M., Schmidt M., Körner C.:
3D grain growth simulation and experimental verification in laser beam melting of IN718
10th CIRP Conference on Photonic Technologies (LANE 2018) (Fürth, 4. September 2018 - 6. September 2018)
In: Procedia CIRP 74 (2018) 2018
DOI: 10.1016/j.procir.2018.08.034
URL: https://www.sciencedirect.com/science/article/pii/S2212827118308187/pdf?md5=ea85f15a94f75d82fce787e5b0a20225πd=1-s2.0-S2212827118308187-main.pdf
Körner C., Ramsperger M., Meid C., Bürger D., Wollgramm P., Bartsch M., Eggeler G.:
Microstructure and Mechanical Properties of CMSX-4 Single Crystals Prepared by Additive Manufacturing
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49 (2018), S. 3781-3792
ISSN: 1073-5623
DOI: 10.1007/s11661-018-4762-5
Küng V., Osmanlic F., Markl M., Körner C.:
Comparison of passive scalar transport models coupled with the Lattice Boltzmann method
In: Computers & Mathematics with Applications (2018)
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2018.01.017
Markl M., Körner C.:
Powder layer deposition algorithm for additive manufacturing simulations
In: Powder Technology 330 (2018), S. 125-136
ISSN: 0032-5910
DOI: 10.1016/j.powtec.2018.02.026
Markl M., Müller A., Ritter N., Hofmeister M., Naujoks D., Schaar H., Abrahams K., Frenzel J., Subramanyam APA., Ludwig A., Pfetzing-Micklich J., Hammerschmidt T., Drautz R., Steinbach I., Rettig R., Singer R., Körner C.:
Development of Single-Crystal Ni-Base Superalloys Based on Multi-criteria Numerical Optimization and Efficient Use of Refractory Elements
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 49A (2018), S. 4134-4145
ISSN: 1073-5623
DOI: 10.1007/s11661-018-4759-0
Momeni S., Guschlbauer R., Osmanlic F., Körner C.:
Selective electron beam melting of a copper-chrome powder mixture
In: Materials Letters 223 (2018), S. 250-252
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2018.03.194
Novak N., Borovinsek M., Vesenjak M., Wormser M., Körner C., Tanaka S., Hokamoto K., Ren Z.:
Crushing Behavior of Graded Auxetic Structures Built from Inverted Tetrapods under Impact
In: physica status solidi (b) (2018)
ISSN: 0370-1972
DOI: 10.1002/pssb.201800040
Osmanlic F., Wudy K., Laumer T., Schmidt M., Drummer D., Körner C.:
Modeling of Laser Beam Absorption in a Polymer Powder Bed
In: Polymers 10 (2018)
ISSN: 2073-4360
DOI: 10.3390/polym10070784
Pobel C., Lodes M., Körner C.:
Selective Electron Beam Melting of Oxide Dispersion Strengthened Copper
In: Advanced Engineering Materials 20 (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800068
Rausch A., Markl M., Körner C.:
Predictive simulation of process windows for powder bed fusion additive manufacturing: Influence of the powder size distribution
In: Computers & Mathematics with Applications (2018)
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2018.06.029
Ritter N., Sowa R., Schauer JC., Gruber D., Göhler T., Rettig R., Körner C., Singer R.:
Effects of Solid Solution Strengthening Elements Mo, Re, Ru, and W on Transition Temperatures in Nickel-Based Superalloys with High γ′-Volume Fraction: Comparison of Experiment and CALPHAD Calculations
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science (2018)
ISSN: 1073-5623
DOI: 10.1007/s11661-018-4730-0
Schwankl M., Himmler D., Urban M., Körner C.:
Optimization of Mechanical Properties of Al–Al‐Compound Castings by Adapted Heat Treatment
In: Advanced Engineering Materials (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800400
Winkler A., Modler N., Drossel WG., Mäder T., Körner C.:
High-Volume Production-Compatible Technologies for Light Metal and Fiber Composite-Based Components with Integrated Piezoceramic Sensors and Actuators
In: Advanced Engineering Materials 20 (2018), Art.Nr.: 1801001
ISSN: 1438-1656
DOI: 10.1002/adem.201801001
Wormser M., Adler L., Körner C.:
Mechanische zellulare Metamaterialien aus Metall durch Selektives Elektronenstrahlschmelzen
In: DGM (Hrsg.): Materialwissenschaft und Werkstofftechnik: Zellulare Werkstoffe · Zellulare Materialien, 2018, S. 16-24 (Dialog, Bd.2/2018)
Zeng Y., Himmler D., Randelzhofer P., Körner C.:
Microstructures and Mechanical Properties of Al3Ti/Al Composites Produced In Situ by High Shearing Technology
In: Advanced Engineering Materials (2018)
ISSN: 1438-1656
DOI: 10.1002/adem.201800259

Arkudas A., Lipp A., Bührer G., Arnold I., Davinova D., Brandl A., Beier J., Körner C., Lyer S., Alexiou C., Kneser U., Horch RE.:
Pedicled Transplantation of Axially Vascularized Bone Constructs in a Critical Size Femoral Defect
In: Tissue Engineering: Parts A, B, and C (2017)
ISSN: 1937-3368
DOI: 10.1089/ten.tea.2017.0110
Do G., Stiegler T., Fiegl M., Adler L., Körner C., Bösmann A., Freund HD., Schwieger W., Wasserscheid P.:
Electrophoretic Deposition of Boehmite on Additively Manufactured, Interpenetrating Periodic Open Cellular Structures for Catalytic Applications
In: Industrial & Engineering Chemistry Research 56 (2017), S. 13403-13411
ISSN: 0888-5885
DOI: 10.1021/acs.iecr.7b02453
Hofmeister M., Franke M., Körner C., Singer R.:
Single Crystal Casting with Fluidized Carbon Bed Cooling: A Process Innovation for Quality Improvement and Cost Reduction
In: Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science 48 (2017), S. 3132-3142
ISSN: 1073-5615
DOI: 10.1007/s11663-017-1110-x
Klassen A., Forster V., Jüchter V., Körner C.:
Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl
In: Journal of Materials Processing Technology 247 (2017), S. 280-288
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2017.04.016
Klassen A., Forster V., Körner C.:
A multi-component evaporation model for beam melting processes
In: Modelling and Simulation in Materials Science and Engineering 25 (2017), Art.Nr.: 025003
ISSN: 1361-651X
DOI: 10.1088/1361-651X/aa5289
Köpf J., Markl M., Körner C.:
3D multilayer grain structure simulation for beam-based additive manufacturing
2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, DEU, 11. Oktober 2017 - 13. Oktober 2017)
In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017
Markl M., Lodes M., Franke M., Körner C.:
Additive Fertigung durch selektives Elektronenstrahlschmelzen
In: Schweissen und Schneiden (2017), S. 30-39
ISSN: 0036-7184
Markl M., Lodes M., Franke M., Körner C.:
Additive manufacturing using selective electron beam melting
In: Welding and Cutting (2017), S. 177-184
ISSN: 1612-3433
Markl M., Rausch A., Forster V., Pobel C., Körner C.:
Predictive numerical simulations of processing windows for powder bed based additive manufacturing
2017 Simulation for Additive Manufacturing, Sinam 2017 (Munich, 11. Oktober 2017 - 13. Oktober 2017)
In: Simulation for Additive Manufacturing 2017, Sinam 2017 2017
Rai A., Helmer H., Körner C.:
Simulation of grain structure evolution during powder bed based additive manufacturing
In: Additive Manufacturing 13 (2017), S. 124-134
ISSN: 2214-7810
DOI: 10.1016/j.addma.2016.10.007
Rausch A., Küng V., Pobel C., Markl M., Körner C.:
Predictive Simulation of Process Windows for Powder Bed Fusion Additive Manufacturing: Influence of the Powder Bulk Density
In: Materials 10 (2017)
ISSN: 1996-1944
DOI: 10.3390/ma10101117
Riedlbauer DR., Scharowsky T., Singer R., Steinmann P., Körner C., Mergheim J.:
Macroscopic simulation and experimental measurement of melt pool characteristics in selective electron beam melting of Ti-6Al-4V
In: International Journal of Advanced Manufacturing Technology (2017)
ISSN: 0268-3768
DOI: 10.1007/s00170-016-8819-6
URL: http://link.springer.com/article/10.1007/s00170-016-8819-6
Ritter N., Schesler E., Müller A., Rettig R., Körner C., Singer R.:
On the Influence of Ta and Ti on Heat-Treatability and γ/γ'-Partitioning of High W Containing Re-Free Nickel-Based Superalloys
In: Advanced Engineering Materials (2017)
ISSN: 1438-1656
DOI: 10.1002/adem.201700150
Scharowsky T., Bauereiß A., Körner C.:
Influence of the hatching strategy on consolidation during selective electron beam melting of Ti-6Al-4V
In: International Journal of Advanced Manufacturing Technology (2017), S. 1-10
ISSN: 0268-3768
DOI: 10.1007/s00170-017-0375-1
Stein S., Wedler J., Rhein S., Schmidt M., Körner C., Michaelis A., Gebhardt S.:
A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures
In: Results in Physics (2017)
ISSN: 2211-3797
DOI: 10.1016/j.rinp.2017.07.034
Warmuth F., Adler L., Osmanlic F., Lodes M., Körner C.:
Fabrication and characterisation of a fully auxetic 3D lattice structure via selective electron beam melting
In: Smart Materials and Structures 26 (2017), Art.Nr.: 025013
ISSN: 1361-665X
DOI: 10.1088/1361-665X/26/2/025013
Warmuth F., Wormser M., Körner C.:
Single phase 3D phononic band gap material
In: Scientific Reports (2017), Art.Nr.: 3843
ISSN: 2045-2322
DOI: 10.1038/s41598-017-04235-1
Wormser M., Warmuth F., Körner C.:
Evolution of full phononic band gaps in periodic cellular structures
In: Applied Physics A: Solids and Surfaces (2017), Art.Nr.: 123:661
ISSN: 0721-7250
DOI: 10.1007/s00339-017-1278-6
Wormser M., Wein F., Stingl M., Körner C.:
Design and Additive Manufacturing of 3D Phononic Band Gap Structures Based on Gradient Based Optimization
In: Materials 10 (2017)
ISSN: 1996-1944
DOI: 10.3390/ma10101125

Adler L., Warmuth F., Lodes M., Osmanlic F., Körner C.:
The effect of a negative Poisson's ratio on thermal stresses in cellular metallic structures
In: Smart Materials and Structures 25 (2016), Art.Nr.: 115038
ISSN: 1361-665X
DOI: 10.1088/0964-1726/25/11/115038
Helmer H., Bauereiß A., Singer R., Körner C.:
Erratum to: ‘Grain structure evolution in Inconel 718 during selective electron beam melting’ (Materials Science & Engineering A (2016) 668 (180–187 (S0921509316305536) (10.1016/j.msea.2016.05.046))
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 676 (2016)
ISSN: 0921-5093
DOI: 10.1016/j.msea.2016.09.016
Helmer H., Bauereiß A., Singer R., Körner C.:
Grain structure evolution in Inconel 718 during selective electron beam melting
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 668 (2016), S. 180-187
ISSN: 0921-5093
DOI: 10.1016/j.msea.2016.05.046
Jüchter V., Körner C.:
Creep properties of Ti-48Al-2Cr-2Nb produced by selective electron beam melting
3rd Conference on Powder Processing Consolidation and Metallurgy of Titanium, 2015 (Lüneburg, 31. August 2015 - 3. September 2015)
DOI: 10.4028/www.scientific.net/KEM.704.190
Köpf J., Rai A., Markl M., Körner C.:
3D Grain Structure Simulation for Beam-Based Additive Manufacturing
6th International Conference on Additive Technologies iCAT (Nürnberg, 29. November 2017 - 30. November 2016)
In: Proceedings of the 6th International Conference on Additive Technologies iCAT 2016 2016
Körner C.:
Additive manufacturing of metallic components by selective electron beam melting - A review
In: International Materials Reviews 61 (2016), S. 361-377
ISSN: 0308-4590
DOI: 10.1080/09506608.2016.1176289
Körner C., Ramsperger M.:
Selective electron beam melting of the single crystalline nickel-base superalloy CMSX-4®: From columnar grains to a single crystal
13th International Symposium on Superalloys, SUPERALLOYS 2016 (Seven Springs, 11. September 2016 - 15. September 2016)
In: M. Hardy, E. Huron, U. Glatzel, B. Griffin, B. Lewis, C. Rae, V. Seetharaman, S. Tin (Hrsg.): Superalloys 2016: Proceedings of the 13th Intenational Symposium of Superalloys 2016
DOI: 10.1002/9781119075646.ch37
Markl M., Bauereiß A., Rai A., Körner C.:
Numerical Investigations of Selective Electron Beam Melting on the Powder Scale
Fraunhofer Direct Digital Manufacturing Conference 2016 (Berlin, 16. März 2016 - 17. März 2016)
In: Proceedings of the Fraunhofer Direct Digital Manufacturing Conference 2016 2016
Markl M., Körner C.:
Multiscale Modeling of Powder Bed-Based Additive Manufacturing
In: Annual Review of Materials Research 46 (2016), S. 93-123
ISSN: 1531-7331
DOI: 10.1146/annurev-matsci-070115-032158
Osmanlic F., Körner C.:
Lattice Boltzmann method for Oldroyd-B fluids
In: Computers & Fluids 124 (2016), S. 190-196
ISSN: 0045-7930
DOI: 10.1016/j.compfluid.2015.08.004
Parsa AB., Ramsperger M., Kostka A., Somsen C., Körner C., Eggeler G.:
Transmission electron microscopy of a CMSX-4 Ni-base superalloy produced by selective electron beam melting
In: Metals 6 (2016), Art.Nr.: 258
ISSN: 2075-4701
DOI: 10.3390/met6110258
Pobel C., Gotterbarm M., Samfaß V., Osmanlic F., Körner C.:
Innovative processing strategies for selective electron beam melting: Influence of scan line spacings on composition of Ti-6Al-4V and microstructure of IN718
6th International Conference on Additive Technologies iCAT 2016 (Nürnberg, 29. November 2016 - 30. November 2016)
In: Igor Drstvenšek, Dietmar Drummer, Michael Schmidt (Hrsg.): Proceedings of 6th International Conference on Additive Technologies, Ljubljana: 2016
Raab S., Guschlbauer R., Lodes M., Körner C.:
Thermal and Electrical Conductivity of 99.9% Pure Copper Processed via Selective Electron Beam Melting
In: Advanced Engineering Materials 18 (2016), S. 1661-1666
ISSN: 1438-1656
DOI: 10.1002/adem.201600078
Rai A., Markl M., Körner C.:
A coupled Cellular Automaton–Lattice Boltzmann model for grain structure simulation during additive manufacturing
In: Computational Materials Science 124 (2016), S. 37-48
ISSN: 0927-0256
DOI: 10.1016/j.commatsci.2016.07.005
Ramsperger M., Singer R., Körner C.:
Microstructure of the Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
In: Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 47 (2016), S. 1469-1480
ISSN: 1073-5623
DOI: 10.1007/s11661-015-3300-y
Ruttert B., Ramsperger M., Mujica Roncery L., Lopez-Galilea I., Körner C., Theisen W.:
Impact of hot isostatic pressing on microstructures of CMSX-4 Ni-base superalloy fabricated by selective electron beam melting
In: Materials and Design 110 (2016), S. 720-727
ISSN: 0261-3069
DOI: 10.1016/j.matdes.2016.08.041
Schwankl M., Wedler J., Körner C.:
Wrought Al - Cast Al compound casting based on zincate treatment for aluminum wrought alloy inserts
In: Journal of Materials Processing Technology 238 (2016), S. 160-168
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2016.07.001
Schwieger W., Thangaraj T., Warmuth F., Warnick KG., Klumpp M., Lodes M., Körner C.:
Fabrication and pressure drop behavior of novel monolithic structures with zeolitic architectures
In: Chemical Engineering Journal 288 (2016), S. 223-227
ISSN: 1385-8947
DOI: 10.1016/j.cej.2015.11.104

Bührer G., Balzer A., Arnold I., Beier J., Körner C., Bleiziffer O., Brandl A., Weis C., Horch RE., Kneser U., Arkudas A.:
Combination of BMP2 and MSCs Significantly Increases Bone Formation in the Rat Arterio-Venous Loop Model
In: Tissue Engineering - Part A 21(1-2) (2015), S. 96-105
ISSN: 1937-335X
DOI: 10.1089/ten.tea.2014.0028
URL: https://www.ncbi.nlm.nih.gov/pmc/articles/PMC4293096/
Eydam A., Suchanek G., Schwankl M., Gerlach G., Singer R., Körner C.:
Evaluation of polarisation state of light metal embedded piezoelectrics
In: Advances in Applied Ceramics 114 (2015), S. 226-230
ISSN: 1743-6753
DOI: 10.1179/1743676114Y.0000000222
Körner C., Liebold Ribeiro Y.:
A systematic approach to identify cellular auxetic materials
In: Smart Materials and Structures 24 (2015), Art.Nr.: 025013
ISSN: 1361-665X
DOI: 10.1088/0964-1726/24/2/025013
Körner C., Warmuth F.:
Phononic band gaps in 2D quadratic and 3D cubic cellular structures
In: Materials 8 (2015), S. 8327-8337
ISSN: 1996-1944
DOI: 10.3390/ma8125463
Lodes M., Guschlbauer R., Körner C.:
Process development for the manufacturing of 99.94% pure copper via selective electron beam melting
In: Materials Letters 143 (2015), S. 298-301
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2014.12.105
Markl M., Ammer R., Rüde U., Körner C.:
Numerical investigations on hatching process strategies for powder-bed-based additive manufacturing using an electron beam
In: International Journal of Advanced Manufacturing Technology 78 (2015), S. 239-247
ISSN: 0268-3768
DOI: 10.1007/s00170-014-6594-9
URL: http://link.springer.com/article/10.1007/s00170-014-6594-9
Markl M., Körner C.:
Free surface Neumann boundary condition for the advection-diffusion lattice Boltzmann method
In: Journal of Computational Physics 301 (2015), S. 230-246
ISSN: 0021-9991
DOI: 10.1016/j.jcp.2015.08.033
Peters W., Eypasch M., Frank T., Schwerdtfeger J., Körner C., Bösmann A., Wasserscheid P.:
Efficient hydrogen release from perhydro-N-ethylcarbazole using catalyst-coated metallic structures produced by selective electron beam melting
In: Energy and Environmental Science 8 (2015), S. 641-649
ISSN: 1754-5692
DOI: 10.1039/c4ee03461a
Ramsperger M., Mujica Roncery L., Lopez-Galilea I., Singer R., Theisen W., Körner C.:
Solution Heat Treatment of the Single Crystal Nickel-Base Superalloy CMSX-4 Fabricated by Selective Electron Beam Melting
In: Advanced Engineering Materials 17 (2015), S. 1486-1493
ISSN: 1438-1656
DOI: 10.1002/adem.201500037
Scharowsky T., Jüchter V., Singer R., Körner C.:
Influence of the Scanning Strategy on the Microstructure and Mechanical Properties in Selective Electron Beam Melting of Ti-6Al-4V
In: Advanced Engineering Materials 17 (2015), S. 1573-1578
ISSN: 1438-1656
DOI: 10.1002/adem.201400542
Schwankl M., Kimme S., Pohle C., Drossel WG., Körner C.:
Active Vibration Damping in Structural Aluminum Die Castings via Piezoelectricity - Technology and Characterization
In: Advanced Engineering Materials 17 (2015), S. 969-975
ISSN: 1438-1656
DOI: 10.1002/adem.201400367
Wedler J., Schwankl M., Körner C.:
Al-Al-Verbundguss mit höherfesten Knetlegierungen
In: Giesserei 102 (2015), S. 46-53
ISSN: 0016-9765

Ammer R., Ljungblad U., Markl M., Körner C., Rüde U.:
Simulating fast electron beam melting with a parallel thermal free surface lattice Boltzmann method
In: Computers & Mathematics with Applications 67 (2014), S. 318-330
ISSN: 0898-1221
DOI: 10.1016/j.camwa.2013.10.001
URL: http://www.sciencedirect.com/science/article/pii/S0898122113005944
Ammer R., Markl M., Jüchter V., Körner C., Rüde U.:
Validation Experiments for LBM Simulations of Electron Beam Melting
In: International Journal of Modern Physics C (2014), S. 1-9
ISSN: 0129-1831
DOI: 10.1142/S0129183114410095
URL: http://arxiv.org/pdf/1402.2440.pdf
Bauereiß A., Scharowsky T., Körner C.:
Defect generation and propagation mechanism during additive manufacturing by selective beam melting
In: Journal of Materials Processing Technology 214 (2014), S. 2522-2528
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2014.05.002
Fuchs B., Körner C.:
Mesh resolution consideration for the viability prediction of lost salt cores in the high pressure die casting process
In: Progress in Computational Fluid Dynamics 14 (2014), S. 24-30
ISSN: 1468-4349
DOI: 10.1504/PCFD.2014.059197
Hartmann J., Blümel C., Ernst S., Fiegl T., Wirth KE., Körner C.:
Aluminum integral foam castings with microcellular cores by nano-functionalization
In: Journal of Materials Science 49 (2014), S. 79-87
ISSN: 0022-2461
DOI: 10.1007/s10853-013-7668-z
Hartmann J., Fiegl T., Körner C.:
Aluminum integral foams with tailored density profile by adapted blowing agents
In: Applied Physics A: Materials Science and Processing 115 (2014), S. 651-660
ISSN: 1432-0630
DOI: 10.1007/s00339-014-8377-4
Helmer H., Körner C., Singer R.:
Additive manufacturing of nickel-based superalloy Inconel 718 by selective electron beam melting: Processing window and microstructure
In: Journal of Materials Research 29 (2014), S. 1987-1996
ISSN: 0884-2914
DOI: 10.1557/jmr.2014.192
Jüchter V., Scharowsky T., Singer R., Körner C.:
Processing window and evaporation phenomena for Ti-6Al-4V produced by selective electron beam melting
In: Acta Materialia 76 (2014), S. 252-258
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2014.05.037
Klassen A., Bauereiß A., Körner C.:
Modelling of electron beam absorption in complex geometries
In: Journal of Physics D-Applied Physics 47 (2014), Art.Nr.: 065307
ISSN: 0022-3727
DOI: 10.1088/0022-3727/47/6/065307
Klassen A., Scharowsky T., Körner C.:
Evaporation model for beam based additive manufacturing using free surface lattice Boltzmann methods
In: Journal of Physics D: Applied Physics 47 (2014), Art.Nr.: 275303
ISSN: 0022-3727
DOI: 10.1088/0022-3727/47/27/275303
Klumpp M., Inayat A., Schwerdtfeger J., Körner C., Singer R., Freund H., Schwieger W.:
Periodic open cellular structures with ideal cubic cell geometry: Effect of porosity and cell orientation on pressure drop behavior
In: Chemical Engineering Journal 242 (2014), S. 364-378
ISSN: 1385-8947
DOI: 10.1016/j.cej.2013.12.060
Körner C., Helmer H., Bauereiß A., Singer R.:
Tailoring the grain structure of IN718 during selective electron beam melting
2nd European Symposium on Superalloys and Their Applications, EUROSUPERALLOYS 2014 (Giens)
DOI: 10.1051/matecconf/20141408001
Körner C., Schwankl M., Himmler D.:
Aluminum-aluminum compound castings by electroless deposited zinc layers
In: Journal of Materials Processing Technology 214 (2014), S. 1094-1101
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2013.12.014
Liebold Ribeiro Y., Körner C.:
Phononic band gaps in periodic cellular materials
In: Advanced Engineering Materials 16 (2014), S. 328-334
ISSN: 1438-1656
DOI: 10.1002/adem.201300064
Scharowsky T., Osmanlic F., Körner C., Singer R.:
Melt pool dynamics during selective electron beam melting
In: Applied Physics A-Materials Science & Processing 114 (2014), S. 1303-1307
ISSN: 0947-8396
DOI: 10.1007/s00339-013-7944-4
Schwankl M., Rübner M., Flössel M., Gebhardt S., Michaelis A., Singer R., Körner C.:
Active functionality of piezoceramic modules integrated in aluminum high pressure die castings
In: Sensors and Actuators A-Physical 207 (2014), S. 84-90
ISSN: 0924-4247
DOI: 10.1016/j.sna.2013.12.016
Schwerdtfeger J., Körner C.:
Selective electron beam melting of Ti-48Al-2Nb-2Cr: Microstructure and aluminium loss
In: Intermetallics 49 (2014), S. 29-35
ISSN: 0966-9795
DOI: 10.1016/j.intermet.2014.01.004

Fuchs B., Eibisch H., Körner C.:
Core viability simulation for salt core technology in high-pressure die casting
In: International Journal of Metalcasting 7 (2013), S. 39-45
ISSN: 1939-5981
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84882430468&origin=inward
Hrabe NW., Heinl P., Bordia RK., Körner C., Fernandes RJ.:
Maintenance of a bone collagen phenotype by osteoblast-like cells in 3D periodic porous titanium (Ti-6Al-4 V) structures fabricated by selective electron beam melting
In: Connective Tissue Research 54 (2013), S. 351-360
ISSN: 0300-8207
DOI: 10.3109/03008207.2013.822864
Körner C., Bauereiß A., Attar E.:
Fundamental consolidation mechanisms during selective beam melting of powders
In: Modelling and Simulation in Materials Science and Engineering 21 (2013), Art.Nr.: 085011
ISSN: 0965-0393
DOI: 10.1088/0965-0393/21/8/085011
Markl M., Ammer R., Ljungblad U., Rüde U., Körner C.:
Electron beam absorption algorithms for electron beam melting processes simulated by a three-dimensional thermal free surface lattice Boltzmann method in a distributed and parallel environment
In: Procedia Computer Science 18 (2013), S. 2127-2136
ISSN: 1877-0509
DOI: 10.1016/j.procs.2013.05.383
URL: http://www.sciencedirect.com/science/article/pii/S1877050913005267
Schaub A., Merklein M., Jüchter V., Singer R., Körner C.:
Funktionsintegration durch die Kombination additiver Fertigungsprozesse mit der Blechumformung
2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung
In: Drummer, D. (Hrsg.): 2. Industriekolloquium des Sonderforschungsbereichs 814 - Additive Fertigung 2013
Schwankl M., Kellner R., Singer R., Körner C.:
The influence of sandblasting on the morphology of electroless deposited zinclayers on aluminum sheets
In: Applied Surface Science 283 (2013), S. 202-208
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2013.06.082
Schwankl M., Rübner M., Singer R., Körner C.:
Integration of PZT-ceramic modules using hybrid structures in high pressure die casting
DOI: 10.1016/j.mspro.2013.02.020
Wieding J., Fritsche A., Heinl P., Körner C., Matthias C., Seitz H., Mittelmeier W., Bader R.:
Biomechanical behavior of bone scaffolds made of additive manufactured tricalciumphosphate and titanium alloy under different loading conditions
In: Journal of Applied Biomaterials and Fundamental Materials 11 (2013), S. 159-166
ISSN: 2280-8000
DOI: 10.5301/JABFM.2013.10832

Arkudas A., Galyna P., Beier J., Weigel L., Körner C., Singer R., Bleiziffer O., Polykandriotis E., Horch RE., Kneser U.:
Combination of extrinsic and intrinsic pathways significantly accelerates axial vascularization of bioartificial tissues
In: Plastic and Reconstructive Surgery 129 (2012), S. 55e-65e
ISSN: 0032-1052
DOI: 10.1097/PRS.0b013e3182361f97
Klassen A., Rübner M., Ilg J., Rupitsch S., Lerch R., Singer R., Körner C.:
Influence of the fabrication process on the functionality of piezoceramic patch transducers embedded in aluminum die castings
In: Smart Materials & Structures 21 (2012)
ISSN: 0964-1726
DOI: 10.1088/0964-1726/21/11/115014
Knorr T., Heinl P., Schwerdtfeger J., Körner C., Singer R., Etzold B.:
Process specific catalyst supports-Selective electron beam melted cellular metal structures coated with microporous carbon
In: Chemical Engineering Journal (2012), S. 725-733
ISSN: 1385-8947
DOI: 10.1016/j.cej.2011.10.009
Scharowsky T., Bauereiß A., Singer R., Körner C.:
Observation and numerical simulation of melt pool dynamic and beam powder interaction during selective electron beam melting
23rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, SFF 2012 (Austin, TX)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84889688177&origin=inward
Schwerdtfeger J., Schury F., Stingl M., Wein F., Singer R., Körner C.:
Mechanical characterisation of a periodic auxetic structure produced by SEBM
In: physica status solidi (b) 249 (2012), S. 1347-1352
ISSN: 0370-1972
DOI: 10.1002/pssb.201084211
Schwerdtfeger J., Singer R., Körner C.:
In situ flaw detection by IR-imaging during electron beam melting
In: Rapid Prototyping Journal 18 (2012), S. 259-263
ISSN: 1355-2546
DOI: 10.1108/13552541211231572

Attar E., Körner C.:
Lattice Boltzmann model for thermal free surface flows with liquid-solid phase transition
In: International Journal of Heat and Fluid Flow 32 (2011), S. 156-163
ISSN: 0142-727X
DOI: 10.1016/j.ijheatfluidflow.2010.09.006
Hartmann J., Trepper A., Körner C.:
Aluminum integral foams with near-microcellular structure
In: Advanced Engineering Materials 13 (2011), S. 1050-1055
ISSN: 1438-1656
DOI: 10.1002/adem.201100035
Hrabe NW., Heinl P., Flinn B., Körner C., Bordia RK.:
Compression-compression fatigue of selective electron beam melted cellular titanium (Ti-6Al-4V)
In: Journal of Biomedical Materials Research Part B-Applied Biomaterials (2011), S. 313-320
ISSN: 1552-4973
DOI: 10.1002/jbm.b.31901
Inayat A., Schwerdtfeger J., Freund H., Körner C., Singer R., Schwieger W., Freund H.:
Periodic open-cell foams: Pressure drop measurements and modeling of an ideal tetrakaidecahedra packing
In: Chemical Engineering Science 66 (2011), S. 2758-2763
ISSN: 0009-2509
DOI: 10.1016/j.ces.2011.03.031
Klassen A., Rübner M., Ilg J., Rupitsch S., Lerch R., Körner C., Singer R.:
Integration of piezoceramic sensors and actuators into structural components via high pressure die casting
In: R. Neugebauer (Hrsg.): Proceedings of the CRC/TR39 3rd Scientific Symposium "Integration of Active Functions into Structural Elements", Chemnitz: 2011
Körner C., Attar E., Heinl P.:
Mesoscopic simulation of selective beam melting processes
In: Journal of Materials Processing Technology 211 (2011), S. 978-987
ISSN: 0924-0136
DOI: 10.1016/j.jmatprotec.2010.12.016
Mitschke H., Schwerdtfeger J., Schury F., Stingl M., Körner C., Singer R., Robins V., Mecke K., Schröder-Turk G.:
Erratum: Finding auxetic frameworks in periodic tessellations
In: Advanced Materials 23 (2011), S. 2669-2674
ISSN: 0935-9648
DOI: 10.1002/adma.201190118
Mitschke H., Schwerdtfeger J., Schury F., Stingl M., Körner C., Singer R., Robins V., Mecke K., Schröder-Turk G.:
Finding Auxetic Frameworks in Periodic Tessellations
In: Advanced Materials 23 (2011), S. 2669-2674
ISSN: 0935-9648
DOI: 10.1002/adma.201100268
Rübner M., Günzl M., Körner C., Singer R.:
Aluminium-aluminium compound fabrication by high pressure die casting
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 528 (2011), S. 7024-7029
ISSN: 0921-5093
DOI: 10.1016/j.msea.2011.05.076
Rübner M., Klassen A., Körner C., Singer R., Ilg J., Rupitsch S., Lerch R.:
Dünnwandige Aluminiumdruckgussteile mit integrierten piezokeramischen Sensoren und Aktoren - Fertigung und Charakterisierung
18. Symposium Verbundwerkstoffe und Werkstoffverbunde (Chemnitz)
In: B. Wielage (Hrsg.): Tagungsband zum 18. Symposium Verbundwerkstoffe und Werkstoffverbunde 2011
Schwerdtfeger J., Wein F., Leugering G., Singer R., Körner C., Stingl M., Schury F.:
Design of Auxetic Structures via Mathematical Optimization
In: Advanced Materials 23 (2011), S. 2650--2654
ISSN: 0935-9648
DOI: 10.1002/adma.201004090

Körner C., Hartmann J.:
Aluminiumgussteile mit zellularem Kern
In: Lightweight Design (2010), S. 28-34
ISSN: 1865-4819
DOI: 10.1007/BF03223614
Ponader S., von Wilmowsky C., Widenmayer M., Lutz R., Heinl P., Körner C., Singer R., Nkenke E., Neukam FW., Schlegel K.:
In vivo performance of selective electron beam-melted Ti-6Al-4V structures
In: Journal of Biomedical Materials Research Part A 92 (2010), S. 56-62
ISSN: 1549-3296
DOI: 10.1002/jbm.a.32337
Schwerdtfeger J., Heinl P., Singer R., Körner C.:
Auxetic cellular structures through selective electron-beam melting
In: physica status solidi (b) 247 (2010), S. 269-272
ISSN: 0370-1972
DOI: 10.1002/pssb.200945513

Attar E., Körner C.:
Lattice Boltzmann method for dynamic wetting problems
In: Journal of Colloid and Interface Science 335 (2009), S. 84-93
ISSN: 0021-9797
DOI: 10.1016/j.jcis.2009.02.055
Körner C., Attar E.:
Numerical Simulation of Foam Solidification Phenomena
MetFoam 2009 (Bratislava)
In: MetFoam 2009 - Proceedings of the 6th Interational Conference on Porous Matals and Metallic Foams 2009
Körner C., Schwerdtfeger J., Singer R.:
Auxetic Cellular Metals
MetFoam 2009 - 6th International Conference on Porous Metals and Metallic foams (Bratislava, 2. September 2009 - 4. September 2009)
In: MetFoam 2009 - Proceedings of the 6th International Conference on Porous Metals and Metallic Foams 2009
Rübner M., Körner C., Singer R.:
Die castings with integrated PZT-modules - fabrication and functionalities
Tagungsband IV ECCOMAS Thematic Conference on Smart Structures and Materials (Porto, 13. Juli 2009 - 15. Juli 2009)
Rübner M., Körner C., Singer R.:
Integration piezokeramischer Module in dünnwandige Aluminiumbauteile mittels Druckguss
2. Wissenschaftliches Symposium Transregio-PT-PIESA (Dresden)
In: R. Neugebauer (Hrsg.): Großserienfähige Produktionstechnologien fuer leichtmetall- und faserverbundbasierte Komponenten mit integrierten Piezosensoren und -aktoren 2009
Schwerdtfeger J., Heinl P., Singer R., Körner C.:
Selective Electron Beam Melting: A new way to auxetic cellular structures
20th Annual International Solid Freeform Fabrication Symposium, SFF 2009 (Austin, TX)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84892631091&origin=inward

Heinl P., Körner C., Singer R.:
Mechanically Adapted Cellular Titanium for Bone Substitution
International Symposium on Cellular Metals for Structural and Functional Applications 2008 (Dresden)
Heinl P., Körner C., Singer R.:
Selective electron beam melting - A novel generative manufacturing technique for cellular titanium
5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549129261&origin=inward
Heinl P., Körner C., Singer R.:
Selective electron beam melting of cellular titanium: Mechanical properties
In: Advanced Engineering Materials 10 (2008), S. 882-888
ISSN: 1438-1656
DOI: 10.1002/adem.200800137
Heinl P., Müller L., Körner C., Singer R., Müller F.:
Cellular Ti-6Al-4V structures with interconnected macro porosity for bone implants fabricated by selective electron beam melting
In: Acta Biomaterialia 4 (2008), S. 1536-1544
ISSN: 1742-7061
DOI: 10.1016/j.actbio.2008.03.013
Ibrahim A., Körner C., Singer R.:
The effect of TiH2 particle size on the morphology of Al-foam produced by PM process
In: Advanced Engineering Materials 10 (2008), S. 845-848
ISSN: 1438-1656
DOI: 10.1002/adem.200800139
Körner C.:
Foam formation mechanisms in particle suspensions applied to metal foams
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 495 (2008), S. 227-235
ISSN: 0921-5093
DOI: 10.1016/j.msea.2007.09.089
Körner C.:
Integral Foam Molding of Light Metals
Springer, 2008
ISBN: 978-3-540-68838-9
Ponader S., Vairaktaris E., Heinl P., von Wilmowsky C., Rottmair A., Körner C., Singer R., Holst S., Schlegel K., Neukam FW., Nkenke E.:
Effects of topographical surface modifications of electron beam melted Ti-6Al-4V titanium on human fetal osteoblasts
In: Journal of Biomedical Materials Research Part A 84 (2008), S. 1111-1119
ISSN: 1549-3296
DOI: 10.1002/jbm.a.31540
Rübner M., Körner C., Singer R.:
Integration of piezoceramic modules into die castings - Procedure and functionalities
3rd International Conference on Smart Materials, Structures and Systems - Emboding Intelligence in Structures and Integrated Systems, CIMTEC 2008 (Acireale, Sicily)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=62449124626&origin=inward
Solórzano E., Hirschmann M., Rodriguez-Perez M., Körner C., de Saja JA.:
Thermal conductivity of AZ91 magnesium integral foams measured by the Transient Plane Source method
In: Materials Letters 62 (2008), S. 3960-3962
ISSN: 0167-577X
DOI: 10.1016/j.matlet.2008.05.020
Trepper A., Körner C., Singer R.:
Reduced Structure Borne Sound of Integral Foam Components
11th International Conference on Aluminium Alloys 2008
In: J. Hirsch, B. Skrotzki, G. Gottstein (Hrsg.): Aluminium Alloys, Proceedings of the 11th International Conference on Aluminium Alloys 2008, Weinheim: 2008
Trepper A., Körner C., Singer R.:
Structural damping of integral foam components
5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549119075&origin=inward
Wiehler H., Heinl P., Körner C., Singer R.:
High pressure integral foam moulding of aluminium
5th International Conference on Porous Metals and Metallic Foams, MetFoam 2007 (Montreal, QC)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=56549084215&origin=inward
Wiehler H., Körner C., Singer R.:
High pressure integral foam moulding of aluminium - Process technology
In: Advanced Engineering Materials 10 (2008), S. 171-178
ISSN: 1438-1656
DOI: 10.1002/adem.200700267

Bräutigam V., Körner C., Singer R., Kaltenbacher M., Meiler M., Lerch R.:
Smart structural components by integration of sensor/actuator-modules in die castings
Industrial and Commercial Applications of Smart Structures Technologies 2007 (San Diego, CA)
DOI: 10.1117/12.705831
Bräutigam V., Rübner M., Körner C., Singer R.:
Druckgießtechnische Integration von piezokeramischen Modulen in Aluminiumbauteile
1. Wissenschaftlichen Kolloquium des SFB/Transregio PT-PIESA
Heinl P., Rottmair A., Körner C., Singer R.:
Cellular titanium by selective electron beam melting
In: Advanced Engineering Materials 9 (2007), S. 360-364
ISSN: 1438-1656
DOI: 10.1002/adem.200700025
Hirschmann M., Körner C., Singer R.:
Integral foam molding - A new process for foamed magnesium castings
5th International Conference on Processing and Manufacturing of Advanced Materials - THERMEC'2006 (Vancouver)
In: Materials Science Forum 2007

Bräutigam V., Schellack T., Körner C., Singer R.:
Optimized fixing technique for the integration of piezoceramic moduls in die castings
In: Gießereiforschung 58 (2006), S. 1-6
ISSN: 0046-5933
Bräutigam V., Wierach P., Körner C., Singer R.:
Integration of piezoceramic modules in die castings - a new production technology
10th Adaptronic Congress (Göttingen, 3. Mai 2006 - 4. Mai 2006)
Körner C., Hirschmann M., Wiehler H.:
Integral foam moulding of light metals
In: Materials Transactions 47 (2006), S. 2188-2194
ISSN: 1345-9678
DOI: 10.2320/matertrans.47.2188
Körner C., Hirschmann M., Wiehler H., Trepper A., Singer R.:
Integralschaumgießen von Leichtmetallen
Industriekolloquium 2006 des SFB 396
Thürey N., Pohl T., Rüde U., Oechsner M., Körner C.:
Optimization and Stabilization of LBM Free Surface FlowSimulations using Adaptive Parameterization
In: Computers & Fluids 35 (2006), S. 934-939
ISSN: 0045-7930
URL: http://www.sciencedirect.com/science/article/pii/S004579300500157X/pdfft?md5=59701b54104d0daae6791fd1b2140ffa&pid=1-s2.0-S004579300500157X-main.pdf

Bräutigam V., Körner C., Singer R.:
Herstellungsverfahren für druckgegossene multifunktionale Verbundbauteile
In: Giesserei 92 (2005), S. 46-49
ISSN: 0016-9765
Euteneuer T., Körner C., Singer R.:
Magnesium-Keramik-Durchdringungswerkstoffe: Einfluss der Morphologie der keramischen Verstärkungsphase
15. Symposiums Verbundwerkstoffe und Werkstoffverbunde (Kassel)
In: M. Schlimmer (Hrsg.): Verbundwerkstoffe und Werkstoffverbunde 2005: Vortragstexte des 15. Symposiums Verbundwerkstoffe und Werkstoffverbunde 2005
Hirschmann M., Körner C., Singer R.:
Injection Moulding of Magnesium Integral Foams
International Symposium on Cellular Metals and Polymers (Fürth)
In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (Hrsg.): Cellular Metals and Polymers, Zürich: 2005
Hirschmann M., Körner C., Singer R.:
Integralschäume aus Magnesiumlegierungen
In: Gießereiforschung 57 (2005), S. 8-14
ISSN: 0046-5933
Hirschmann M., Wiehler H., Körner C., Singer R.:
Light metal integral foam - a promising material for structural applications
CELLMET 2005 (Dresden)
In: G. Stephani, B. Kieback (Hrsg.): Proceedings of the International Symposium on Cellular metals for Structural and Functional Applications 2005 2005
Ibrahim A., Körner C., Singer R.:
Investigation of Micropore Creation on the PM-foam Mophology
International Symposium on Cellular Metals and Polymers (Fürth)
In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (Hrsg.): Cellular Metals and Polymers, Zürich: 2005
Körner C., Arnold M., Singer R.:
Metal foam stabilization by oxide network particles
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 396 (2005), S. 28-40
ISSN: 0921-5093
DOI: 10.1016/j.msea.2005.01.001
Körner C., Pohl T., Rüde U., Thürey N., Hofmann T.:
FreeWIHR: Lattice Boltzmann Methods with Free Surfaces and their Application in Material Technology
KONWIHR Results Workshop (Garching)
In: High Performance Computing in Science and Engineering, Garching 2004, Berlin/Heidelberg: 2005
Körner C., Pohl T., Rüde U., Thürey N., Zeiser T.:
Parallel Lattice Boltzmann Methods for CFD Applications
In: Numerical Solution of Partial Differential Equations on Parallel Computers, New York: Springer, 2005, S. 439-465 (Lecture Notes in Computational Science and Engineering, Bd.51)
ISBN: 3-540-29076-1
URL: https://www10.informatik.uni-erlangen.de/Publications/Papers/2005/LBMCFD_LNCSE51.pdf
Körner C., Thies M., Hofmann T., Thürey N., Rüde U.:
Lattice Boltzmann Model for Free Surface Flow for Modeling Foaming
In: Journal of Statistical Physics 121 (2005), S. 179-196
ISSN: 0022-4715
DOI: 10.1007/s10955-005-8879-8
URL: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.321.499&rep=rep1&type=pdf
Oechsner M., Thies M., Arnold M., Körner C., Singer R.:
Simulation of Metal Foam Formation with the Lattice Boltzmann Method
International Symposium on Cellular Metals and Polymers (Fürth)
In: R.F. Singer, C. Körner, V. Altstädt, H. Münstedt (Hrsg.): Cellular Metals and Polymers, Zürich: 2005
Singer R., Körner C., Altstädt V., Münstedt H.:
Cellular Metals and Polymers
Zürich: Trans Tech Publications LTD, 2005
ISBN: 0-87849-941-x
Thürey N., Rüde U., Körner C.:
Interactive Free Surface Fluids with the Lattice Boltzmann Method
(2005), S. 10
URL: https://www10.cs.fau.de/publications/reports/TechRep_2005-04.pdf
(Techreport)

Hirschmann M., Lamm M., Körner C., Singer R.:
Magnesium Integral Foams: Production and Properties
6th International Conference Magnesium Alloys and Their Applications (Wolfsburg)
In: K. U. Kainer (Hrsg.): Proceedings of the 6th International Conference Magnesium Alloys and Their Applications, Weinheim: 2004
Körner C., Hirschmann M., Bräutigam V., Singer R.:
Endogenous particle stabilization during magnesium integral foam production
In: Advanced Engineering Materials 6 (2004), S. 385-390
ISSN: 1438-1656
DOI: 10.1002/adem.200405147
Körner C., Pohl T., Rüde U., Thürey N., Hofmann T.:
FreeWiHR --- LBM with Free Surfaces
(2004), S. 15
URL: https://www10.cs.fau.de/publications/reports/TechRep_2004-06.pdf
(Techreport)
Körner C., Thies M.:
Foaming of Light Metals: Mechanisms and Numerical Modelling
3rd International Conference "Computational Modeling and Simulation of Materials" (Acireale)
In: P. Vincenzini (Hrsg.): Advances in Science and Technology Vol. 43, Proceeding of the 3rd Conference "Computational Modeling and Simulation of Materials, Part B" 2004

Arnold M., Körner C., Singer R.:
PM aluminium foams: Stabilizing mechanisms and optimization
MetFoam 2003 (Berlin, 23. Juni 2003 - 25. Juni 2003)
In: J. Banhart, N. A. Fleck (Hrsg.): Cellular Metals and Foaming Technology, Berlin: 2003
Brunnbauer M., Hirschmann M., Körner C., Singer R.:
Gießtechnische Herstellung von Leichtmetallbauteilen mit zellularem Kern
In: M. Geiger, G. W. Ehrenstein (Hrsg.): Robuste, verkürzte Prozessketten für flächige Leichtbauteile, Bamberg: Meisenbach-Verlag, 2003, S. 57-69
Brunnbauer M., Körner C., Singer R.:
Encasing of aluminium foam with magnesium by die casting
MetFoam 2003 (Berlin, 23. Juni 2003 - 25. Juni 2003)
In: J. Banhart, N. A. Fleck (Hrsg.): Cellular Metals and Metal Foaming Technology, Berlin: 2003
Körner C., Hirschmann M., Lamm M., Singer R.:
Magnesium integral foams
MetFoam 2003 (Berlin, 23. Juni 2003 - 25. Juni 2003)
In: J. Banhart, N. A. Fleck (Hrsg.): Cellular Metals and Metal Foaming Technology, Berlin: 2003
Rüde U., Thürey N., Körner C., Pohl T.:
Simulation von Metallschaum mittels der Lattice-Boltzmann Methode
35 (2003), S. 4-8
(Techreport)
Singer R., Körner C., Rosiwal S.:
From New Materials to Finished Components - Metals Research at the WTM institute of the University of Erlangen-Nuernberg
In: Maschinenbau in Bayern 2003, 2003, S. 46-49
(anderer)
Ströhla S., Winter W., Kuhn G., Brunnbauer M., Hirschmann M., Körner C., Singer R., Dörfler SM., Otto A.:
Metallschaumverbundstrukturen - Prozesstechnologie und werkstoffmechanische Analyse
Robuste verkürzte Prozessketten für flächige Leichtbauteile (Erlangen)
In: Robuste verkürzte Prozessketten für flächige Leichtbauteile, Industriekolloquium 2003 des SFB 396, Bamberg: 2003

Körner C., Heinrich F., Singer R.:
Encasing by Casting
In: B. Kriszt, H. P. Degischer (Hrsg.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, S. 103-113
ISBN: 3-527-30339-1
Körner C., Ottmüller M., Singer R., Popovska N., Schmidt S., Gerhard H.:
Optimierung von Kohlenstofflangfaser/AZ91 Verbunden durch eine pyroC/TiN-Doppelbeschichtung
Verbundwerkstoffe und Werkstoffverbunde (Chemnitz, 5. September 2001 - 7. September 2001)
In: B. Wielage, G. Leonhardt (Hrsg.): Verbundwerkstoffe und Werkstoffverbunde, Chemnitz: 2002
URL: http://www.wileyeurope.com/cda/product/0,,3527303197,00.html
Körner C., Singer R.:
Foaming Processes for Aluminum
In: B. Kriszt, H. P. Degischer (Hrsg.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, S. 8-14
ISBN: 3-527-30339-1
Körner C., Singer R.:
The Physics of Foaming: Structure Formation and Stability
In: B. Kriszt, H. P. Degischer (Hrsg.): Handbook of Cellular Metals, München: Wiley-VCH, 2002, S. 33-43
ISBN: 3-527-30339-1
Körner C., Thies M., Singer R.:
Modeling of metal foaming with lattice Boltzmann automata
In: Advanced Engineering Materials 4 (2002), S. 765-769
ISSN: 1438-1656
DOI: 10.1002/1527-2648(20021014)4:103.0.CO;2-M
Olurin O., Arnold M., Körner C., Singer R.:
The investigation of morphometric parameters of aluminium foams using micro-computed tomography
In: Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 328 (2002), S. 334-343
ISSN: 0921-5093
DOI: 10.1016/S0921-5093(01)01809-3

Eitschberger M., Körner C., Singer R.:
Schleudergießen von Metall-Keramik-Verbundwerkstoffen bei hohen Drehzahlen und Temperaturen
Verbundwerkstoffe und Werkstoffverbunde (Chemnitz, 5. September 2001 - 7. September 2001)
In: B. Wielage, G. Leonhardt (Hrsg.): Verbundwerkstoffe und Werkstoffverbunde, Weinheim: 2001
Heinrich F., Körner C., Singer R.:
Encasing of aluminium foams by die casting: foam core properties and core fixing
Proceedings of the 2nd International Conference on Cellular Metals and Metal Foaming Technology (MetFoam 2001) (Bremen)
In: Metal Foams and Porous Metal Structures, Bremen: 2001
URL: http://www.mit-verlag.de/b111.html
Körner C., Thies M., Arnold M., Singer R.:
Modelling of metal foaming by in-situ gas formation.
MetFoam 2001 (Bremen, 18. Juni 2001 - 20. Juni 2001)
In: J. Banhart, M. F. Ashby, N. A. Fleck (Hrsg.): Cellular Metals and Foaming Technology, Bremen: 2001

Arnold M., Körner C., Thies M., Singer R.:
Experimental and Numerical Investigation of the Formation of Metal Foam
Materials Week 2000 (München, 25. September 2000 - 28. September 2000)
Heinrich F., Körner C., Singer R.:
Encasing of Al-foams by Die Casting as Manufacturing Process for Light Weight Components
Materials Week 2000 (München, 25. September 2000 - 28. September 2000)
Heinrich F., Körner C., Singer R.:
Herstellung flächiger Leichtbauteile durch Umgießen von Aluminium-Schäumen im Druckgießverfahren
In: Materialwissenschaft und Werkstofftechnik 32 (2000), S. 428-431
ISSN: 0933-5137
Heinrich F., Körner C., Singer R.:
Production of flat light-weight structural components by recasting of aluminum foams
Körner C., Berger F., Arnold M., Stadelmann CG., Singer R.:
Influence of processing conditions on morphology of metal foams produced from metal powder
In: Materials Science and Technology 16 (2000), S. 781-784
ISSN: 0267-0836
Körner C., Heinrich F., Singer R., Otto A., Schöberl T., Geiger M.:
Herstellung flächiger Verbundbauteile mit Metallschaumkernen
Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium (Bamberg, 24. Mai 2000 - 25. Mai 2000)
In: Geiger, M.; Ehrenstein, G.W. (Hrsg.): Sonderforschungsbereich 396 - robuste verkürzte Prozessketten für flächige Leichtbauteile - 1. Berichtskolloquium 24./25.Mai 2000
Körner C., Schäff W., Ottmüller M., Singer R.:
Carbon Long Fiber Reinforced Magnesium Alloys
In: Advanced Engineering Materials 2 (2000), S. 327-337
ISSN: 1438-1656
Körner C., Singer R.:
Processing of Metal Foams - Challenges and Opportunities
In: Advanced Engineering Materials 2 (2000), S. 159-165
ISSN: 1438-1656

Körner C., Singer R.:
Numerical Simulation of Foam Formation and Evolution with Modified Cellular Automata
MetFoam '99 (Bremen)
In: J. Banhart, M. F. Ashby, N. A. Fleck (Hrsg.): Metal Foams and Porous Metal Structures, Bremen: 1999
Ottmüller M., Körner C., Singer R.:
Influence of the Fiber-Matrix Interface on the Strength of Unidirectional Carbon Fiber Reinforced Magnesium Composites
Euromat 99 (München)
In: Metal Matrix Composites and Foam 1999
Schäff W., Hagenbruch M., Körner C., Singer R.:
Fabrication process for continuous magnesium/carbon-fibre composites with graded fibre content
Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98 (Dresden)
In: Proceedings of the 1998 5th International Symposium on Functionally Graded Materials, FGM '98, Uetikon-Zuerich, Switzerland: 1999
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032676217&origin=inward
Schäff W., Heinrich F., Körner C., Singer R.:
Thermal Fatigue of Locally Fiber Reinforced Magnesium with Graded Structure
12th International Conference on Composite Materials (Paris)
Schäff W., Heinrich F., Körner C., Singer R.:
Thermische Ermüdung von lokal verstärkten Magnesium-Kohlenstoff-Verbundwerkstoffen mit gradierter Struktur
Verbundwerkstoffe und Werkstoffverbunde (Hamburg, 3. Oktober 1999 - 7. Oktober 1999)
In: K. Schulte, K. U. Kainer (Hrsg.): Verbundwerkstoffe und Werkstoffverbunde 1999

Körner C., Bergmann HW.:
The physical defects of the hyperbolic heat conduction equation
In: Applied Physics A-Materials Science & Processing 67 (1998), S. 397-401
ISSN: 0947-8396
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032181110&origin=inward

Körner C.:
Theoretische Untersuchungen zur Wechselwirkung von ultrakurzen Laserpulsen mit Metallen (Dissertation, 1997)

Bergmann HW., Körner C., Hartmann M., Mayerhofer R.:
Precision machining with copper vapour lasers
NATO Proc. Advanced Workshop, Pulsed Metal Vapor Lasers
Körner C., Bergmann HW.:
Theoretical description of laser ablation
Körner C., Bergmann HW.:
Thermal and Mechanical Aspects in Short Pulse Laser Interaction with Metals
European Conference on Laser Treatment of Materials 1996 (Stuttgart)
Körner C., Mayerhofer R., Hartmann M., Bergmann HW.:
Physical and material aspects in using visible laser pulses of nanosecond duration for ablation
In: Applied Physics A-Materials Science & Processing 63 (1996), S. 123-131
ISSN: 0947-8396
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0030214563&origin=inward
Müller K., Körner C., Bergmann HW.:
Numerische Simulation der Eigenspannungen und Deformationen beim Laserstrahlrandschichthärten
In: Härterei-Technische Mitteilungen 51 (1996), S. 19-28
ISSN: 0017-6583
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=4243138582∨igin=inward

Bergmann HW., Hartmann M., Mayerhofer R., Körner C.:
Kupferdampflaser für die Mikromaterialbearbeitung
In: Laser '95, 1995, S. 231-237
Hilbinger RM., Mayer S., Körner C., Bergmann HW.:
Eigenspannungen beim Laserstrahlschweißen verschiedender Baustähle
In: Härterei-Technische Mitteilungen 50 (1995), S. 380-386
ISSN: 0017-6583
Körner C., Bergmann HW.:
Theoretical Descreption of Laser Ablation and its Application on Precision Machining
Laser Processing: Surface Treatment and Film Deposition (Sesimbra)
In: Proceedings of the NATO ASI 1995

Domes J., Körner C., Bergmann HW.:
Residual stresses in laser hardened steels and their numerical simulation
European Conference on Laser Treatment of Materials 1994
Körner C., Müller K., Domes J., Damaschek R., Bergmann HW.:
Experimental and numerical determination of distortion of laser hardened steels
International Symposium on Metals Science: Numerical Predictions of Deformation Processes and the Behaviour of Real Materials (Roskilde)
Wang HM., Stiele H., Lang A., Körner C., Bergmann HW.:
Surface remelting of ductile iron with a high power pulsed Nd:YAG laser
High Power Lasers and Laser Applications V (Wien)

Integral Foam Molding of Light Metals

Technology, Foam Physics and Foam Simulation
2008, XII, 224 p. 143 illus., Hardcover
ISBN: 978-3-540-68838-9
Springer Verlag

Cellular Metals and Polymers

2005, III, 286 p., Hardcover
ISBN: 0-87849-491-x
Trans Tech Publications

Vorlesung

Metallic Materials: Principles

Vorlesung mit Übung

Seminar

Körner, Carolin

Adresse

Kontakt

Funktionen

Top-Publikationen

Publikationen

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1995

1994

Bücher

Integral Foam Molding of Light Metals

Cellular Metals and Polymers

Lehrveranstaltungen