apl. Prof. Dr.-Ing. habil. Stefan Rosiwal

Adresse

Martensstraße 5-7 91058 Erlangen

218, 02

Kontakt

E-Mail: stefan.rosiwal@fau.de
Telefon: +49 9131 85-27517

Börner R., Helmreich T., Göltz M., Bandaru NK., Steinert P., Schaarschmidt I., Rosiwal S., Schubert A.:
Simulation of the stress distribution in diamond coatings applied by chemical vapor deposition on martensitic stainless steel X46Cr13 with a deterministic surface microstructure
In: Thin Solid Films 815 (2025), p. 140646
ISSN: 0040-6090
DOI: 10.1016/j.tsf.2025.140646
Helmreich T., Göltz M., Vomhof E., Böhmler M., Englert JM., Rosiwal S.:
In situ Raman spectroscopy of thermal stress in diamond on steel during HF-CVD coating and subsequent quenching
In: Vacuum 240 (2025), Article No.: 114563
ISSN: 0042-207X
DOI: 10.1016/j.vacuum.2025.114563
Röckelein A., Meier T., Borchardt R., Rosiwal S., Hanenkamp N.:
Temperature Measurement with Indexable Inserts via Functional Coating in Turning Processes
In: Procedia CIRP 134 (2025), p. 247-252
ISSN: 2212-8271
DOI: 10.1016/j.procir.2025.03.024
URL: https://www.sciencedirect.com/science/article/pii/S2212827125004780
Vass A., Göltz M., Ghanem H., Rosiwal S., Franken T., Palkovits R., Mul G., Tsampas MN., Katsoukis G., Altomare M.:
Pulsed-Current Operation Enhances H2O2 Production on a Boron-Doped Diamond Mesh Anode in a Zero-Gap PEM Electrolyzer
In: Chemsuschem (2025)
ISSN: 1864-5631
DOI: 10.1002/cssc.202401947

Börner R., Helmreich T., Schubert A., Rosiwal S.:
Influence of the width of cut in ultrasonic vibration superimposed face milling of X46Cr13 and X40CrMoV5-1 on the surface microstructure and CVD diamond coating adhesion
7th CIRP Conference on Surface Integrity, CSI 2024 (Bremen, DEU, 15. Mai 2024 – 17. Mai 2024)
In: Daniel Meyer, Bernhard Karpuschewski, Marco Eich, Matthias Hettig (ed.): Procedia CIRP 2024
DOI: 10.1016/j.procir.2024.05.039
Jumah R., Alsalman S., Jum’h I., Al-Addous M., Hrahsheh F., Ghanem H., Rosiwal S., Telfah A.:
Chemical structure dependent electrochemical degradation of antibiotics using Boron-doped Diamond Electrodes
In: Journal of Environmental Chemical Engineering 12 (2024), Article No.: 114115
ISSN: 2213-3437
DOI: 10.1016/j.jece.2024.114115
Mavrikis S., Nieuwoudt M., Göltz M., Ehles S., Körner A., Hutzler A., Fossy E., Zervas A., Brai O., Wegener M., Doerrfuss F., Bouwman P., Rosiwal S., Wang L., Ponce de León C.:
Continuous Production of Ethylene and Hydrogen Peroxide from Paired Electrochemical Carbon Dioxide Reduction and Water Oxidation
In: Advanced Energy Materials (2024)
ISSN: 1614-6832
DOI: 10.1002/aenm.202304247

Göltz M., Helmreich T., Börner R., Kupfer T., Schubert A., Rosiwal S.:
Spatial distribution of thermally induced residual stresses in HF-CVD diamond coatings on microstructured steel surfaces
In: Diamond and Related Materials 136 (2023), Article No.: 109931
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2023.109931
Zulla M., Vierheilig V., Koch M., Burkovski A., Karl M., Rosiwal S.:
Diamond as Insulation for Conductive Diamond—A Spotted Pattern Design for Miniaturized Disinfection Devices
In: C – Journal of Carbon Research 9 (2023), Article No.: 78
ISSN: 2311-5629
DOI: 10.3390/c9030078

Abdelnabi AABA., Al Theeb N., Almomani MAA., Ghanem H., Rosiwal S.:
Effect of electrode parameters in the electro-production of reactive oxidizing species via boron-doped diamond under batch mode
In: Water Environment Research 94 (2022)
ISSN: 1061-4303
DOI: 10.1002/wer.10830
Fromm T., Bruns S., Müller MC., Fink A., Borchardt R., Rosiwal S., Durst K.:
Bioinspired damage tolerant diamond-metal laminates by alternating CVD and PVD processes
In: Materials & Design 213 (2022), Article No.: 110315
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2021.110315
Koch M., Palarie V., Göltz M., Kurzer M., Zulla M., Rosiwal S., Willner M., Burkovski A., Karl M.:
Root Canal Obturation by Electrochemical Precipitation of Calcium Phosphates
In: Applied Sciences 12 (2022), Article No.: 2956
ISSN: 2076-3417
DOI: 10.3390/app12062956
Koch M., Palarie V., Koch L., Burkovski A., Zulla M., Rosiwal S., Karl M.:
Preclinical Testing of Boron-Doped Diamond Electrodes for Root Canal Disinfection—A Series of Preliminary Studies
In: Microorganisms 10 (2022), Article No.: 782
ISSN: 2076-2607
DOI: 10.3390/microorganisms10040782
Koch M., Rosiwal S., Burkovski A.:
Environmentally sustainable elimination of microbes using boron-doped diamond electrodes: From water treatment to medical applications
In: Pankaj Chowdhary, Sujata Mani, Preeti Chaturvedi (ed.): Microbial Biotechnology: Role in Ecological Sustainability and Research, Wiley Blackwell, 2022, p. 355-364
ISBN: 9781119834489
DOI: 10.1002/9781119834489.ch18
Mavrikis S., Göltz M., Rosiwal S., Wang L., De Leon CP.:
Carbonate-Induced Electrosynthesis of Hydrogen Peroxide via Two-Electron Water Oxidation
In: Chemsuschem (2022)
ISSN: 1864-5631
DOI: 10.1002/cssc.202102137

Mavrikis S., Göltz M., Perry SC., Bogdan F., Leung PK., Rosiwal S., Wang L., Ponce-de-León C.:
Eﬀective Hydrogen Peroxide Production from Electrochemical Water Oxidation
In: ACS Energy Letters 2021 (2021), p. 2369−2377
ISSN: 2380-8195
DOI: 10.1021/acsenergylett.1c00904
Wöllner S., Nowak T., Zhang GR., Rockstroh N., Ghanem H., Rosiwal S., Brückner A., Etzold BJ.:
Avoiding Pitfalls in Comparison of Activity and Selectivity of Solid Catalysts for Electrochemical HMF Oxidation
In: ChemistryOpen 10 (2021), p. 600-606
ISSN: 2191-1363
DOI: 10.1002/open.202100072
Xuan Y., Fromm T., Bruns S., Borchardt R., Durst K., Rosiwal S.:
A simple way to make tough diamond/metal laminates
In: Journal of the European Ceramic Society (2021)
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2021.03.055

Borchardt R., Fromm T., Haase A., Fecher J., Rosiwal S.:
World’s First Thermoelectric Generator Made of Tailored Carbon Allotropes
In: Advanced Engineering Materials (2020)
ISSN: 1438-1656
DOI: 10.1002/adem.202000108
Borchardt R., Sand P., Fromm T., Rosiwal S.:
Novel structuring technique for diamond coatings
In: Diamond and Related Materials 110 (2020)
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2020.108103
Börner R., Göltz M., Helmreich T., Schubert A., Rosiwal S.:
Surface Microstructuring of Steel Components for CVD Diamond Coating by Ultrasonic Vibration Superimposed Face Milling using Tailored Tools
5th CIRP Conference on Surface Integrity, CSI 2020 (, 1. Juni 2020 – 5. Juni 2020)
In: Pedro Jose Arrazola, Aito Madariaga (ed.): Procedia CIRP 2020
DOI: 10.1016/j.procir.2020.02.020
Helmreich T., Göltz M., Mengele T., Rosiwal S.:
CVD-Diamant als Schutzschicht im Aluminiumguss
In: Gießerei-Praxis (2020), p. 32-34
ISSN: 0016-9781
Koch M., Burkovski A., Zulla M., Rosiwal S., Geissdorfer W., Dittmar R., Grobecker-Karl T.:
Pilot Study on the Use of a Laser-Structured Double Diamond Electrode (DDE) for Biofilm Removal from Dental Implant Surfaces
In: Journal of Clinical Medicine 9 (2020)
ISSN: 2077-0383
DOI: 10.3390/jcm9093036
Koch M., Göltz M., Meng X., Karl M., Rosiwal S., Burkovski A.:
Electrochemical Disinfection of Dental Implants Experimentally Contaminated with Microorganisms as a Model for Periimplantitis
In: Journal of Clinical Medicine (2020)
ISSN: 2077-0383
DOI: 10.3390/jcm9020475
Mavrikis S., Göltz M., Rosiwal S., Wang L., Ponce-de-León C.:
Boron-Doped Diamond Electrocatalyst for Enhanced Anodic H2O2 Production
In: ACS Applied Energy Materials (2020)
ISSN: 2574-0962
DOI: 10.1021/acsaem.0c00093

Böhm AL., Koch M., Rosiwal S., Burkovski A., Karl M., Grobecker-Karl T.:
Electrochemical Disinfection of Experimentally Infected Teeth by Boron-Doped Diamond Electrode Treatment
In: Journal of Clinical Medicine (2019)
ISSN: 2077-0383
DOI: 10.3390/jcm8122037
Göltz M., Koch M., Detsch R., Karl M., Burkovski A., Rosiwal S.:
Influence of In-Situ Electrochemical Oxidation on Implant Surface and Colonizing Microorganisms Evaluated by Scanning Electron Microscopy
In: Materials 12 (2019), Article No.: 3977
ISSN: 1996-1944
DOI: 10.3390/ma12233977
Schorr B., Ghanem H., Rosiwal S., Geißdörfer W., Burkovski A.:
Elimination of bacterial contaminations by treatment of water with boron-doped diamond electrodes
In: World Journal of Microbiology & Biotechnology 35 (2019), Article No.: 48
ISSN: 0959-3993
DOI: 10.1007/s11274-019-2624-y
Vasconcelos VM., Ponce-de-León C., Rosiwal S., Lanza MRV.:
Electrochemical Degradation of Reactive Blue 19 Dye by Combining Boron-Doped Diamond and Reticulated Vitreous Carbon Electrodes
In: ChemElectroChem (2019)
ISSN: 2196-0216
DOI: 10.1002/celc.201900563
Özkan S., Ghanem H., Mohajernia S., Hejazi S., Fromm T., Borchardt R., Rosiwal S., Schmuki P.:
Boron-doped diamond (BDD) as an efficient back contact to thermally grown TiO2 photoelectrodes
In: ChemElectroChem (2019)
ISSN: 2196-0216
DOI: 10.1002/celc.201901073

Jum’h I., Abdelhay A., Telfah A., Al-Akhras MA., Al-Kazwini A., Rosiwal S.:
Veratric acid removal from water by electrochemical oxidation on BDD anode
2nd International Conference on Advanced Materials, ICAM 2017 (Irbid, 10. Juli 2017 – 13. Juli 2017)
In: IOP Conference Series: Materials Science and Engineering Volume 305 2018
DOI: 10.1088/1757-899X/305/1/012021
Kütemeyer M., Helmreich T., Rosiwal S., Koch D.:
Influence of zirconium-based alloys on manufacturing and mechanical properties of ultra high temperature ceramic matrix composites
In: Advances in Applied Ceramics 117 (2018), p. 62-69
ISSN: 1743-6753
DOI: 10.1080/17436753.2018.1509810

Rosiwal S., Helmreich T., Mengele T., Ballmes H., Hausmann C., Regenberg C.:
Diamant auf Stahl gegen den Oberflächenverschleiß durch Aluminiumanhaftungen
In: Konstruktion (2017), p. IW8-IW9
ISSN: 0720-5953

Fecher J., Wormser M., Rosiwal S.:
Long term oxidation behavior of micro- and nano-crystalline CVD diamond foils
In: Diamond and Related Materials 61 (2016), p. 41-45
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2015.11.009
Ghanem H., Rosiwal S., Göltz M., Espin D.:
Application of Electrochemical Treatment Technology of Produced Water of a Heavy Oil Field, via Boron Doped Diamond BDD Electrode
SPE Latin America and Caribbean Heavy and Extra Heavy Oil Conference (Lima, 19. Oktober 2016 – 20. Oktober 2016)
In: Proceedings of SPE Latin America and Caribbean Heavy and Extra Heavy Oil Conference 2016
Haase A., Peters A., Rosiwal S.:
Growth and thermoelectric properties of nitrogen-doped diamond/graphite
In: Diamond and Related Materials 63 (2016), p. 222-226
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2015.10.023
Jum’h I., Abdelhay A., Al-Ta’ani H., Telfah A., Alnaief M., Rosiwal S.:
Fabrication and application of boron doped diamond BDD electrode in olive mill wastewater treatment in Jordan
In: Journal of Water Reuse and Desalination 7 (2016)
ISSN: 2408-9370
DOI: 10.2166/wrd.2016.062
Kütemeyer M., Schomer L., Helmreich T., Rosiwal S., Koch D.:
Fabrication of ultra high temperature ceramic matrix composites using a reactive melt infiltration process
In: Journal of the European Ceramic Society 36 (2016), p. 3647-3655
ISSN: 0955-2219
DOI: 10.1016/j.jeurceramsoc.2016.04.039

Engenhorst M., Fecher J., Notthoff C., Schierning G., Schmechel R., Rosiwal S.:
Thermoelectric transport properties of boron-doped nanocrystalline diamond foils
In: Carbon 81 (2015), p. 650-662
ISSN: 0008-6223
DOI: 10.1016/j.carbon.2014.10.002
Lodes M., Kachold F., Rosiwal S.:
Mechanical properties of micro- and nanocrystalline diamond foils
In: Philosophical Transactions of the Royal Society A-Mathematical Physical and Engineering Sciences 373 (2015), Article No.: 20140136
ISSN: 1364-503X
DOI: 10.1098/rsta.2014.0136

Kachold F., Lodes M., Rosiwal S., Singer R.:
Direct measurement of Young’s modulus, fracture strength and fracture toughness of nanocrystalline diamond foil by means of tensile testing
In: Acta Materialia 61 (2013), p. 7000-7008
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2013.08.014
Lodes M., Sailer S., Rosiwal S., Singer R.:
Adhesive bonding and brazing of nanocrystalline diamond foil onto different substrate materials
In: Applied Surface Science 282 (2013), p. 335-341
ISSN: 0169-4332
DOI: 10.1016/j.apsusc.2013.05.129
Metzler P., von Wilmowsky C., Stadlinger B., Zemann W., Schlegel K., Rosiwal S., Rupprecht S.:
Nano-crystalline diamond-coated titanium dental implants – A histomorphometric study in adult domestic pigs
In: Journal of Cranio-Maxillofacial Surgery 41 (2013), p. 532-538
ISSN: 1010-5182
DOI: 10.1016/j.jcms.2012.11.020
Sobolewski S., Lodes M., Rosiwal S., Singer R.:
Surface energy of growth and seeding side of free standing nanocrystalline diamond foils
In: Surface & Coatings Technology 232 (2013), p. 640-644
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2013.06.051
Uhlmann E., Langmack M., Fecher J., Rosiwal S., Singer R.:
Using boron doped diamond foils for fabrication of micro cavities with EDM
13th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2013
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84908155805&origin=inward

Kellermann K., Fandrey J., Rosiwal S., Singer R.:
CVD-Diamond Coating as Wear Protection for Standard Heat-Treatable Steel
International Symposium on Friction, Wear and Wear Protection 2008 (Aachen)
DOI: 10.1002/9783527628513.ch30
Ramakrishnan R., Lodes M., Rosiwal S., Singer R.:
Self-supporting nanocrystalline diamond foils: Influence of template morphologies on the mechanical properties measured by ball on three balls testing
In: Acta Materialia 59 (2011), p. 3343-3351
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2011.02.009
Ahmed F., Bayerlein K., Rosiwal S., Göken M., Durst K.:
Stress evolution and cracking of crystalline diamond thin films on ductile titanium substrate: Analysis by micro-Raman spectroscopy and analytical modelling
In: Acta Materialia 59 (2011), p. 5422-5433
ISSN: 1359-6454
DOI: 10.1016/j.actamat.2011.05.015
Uhlmann E., Langmack M., Garn R., Oberschmidt D., Fecher J., Rosiwal S., Singer R.:
Using diamond coated tool-electrodes for drilling micro holes with EDM
11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84908255357&origin=inward

Kellermann K., Erhardt S., Fandrey J., Rosiwal S., Singer R.:
Influence of surface roughness on the tribological properties of HF-CVD diamond coated heat-treatable steel
In: Wear 269 (2010), p. 811-815
ISSN: 0043-1648
DOI: 10.1016/j.wear.2010.08.009
Lodes M., Rosiwal S., Singer R.:
Self-supporting nanocrystalline diamond foils – A new concept for crystalline diamond on any technical surface
In: Key Engineering Materials 438 (2010), p. 163-169
ISSN: 1013-9826
DOI: 10.4028/www.scientific.net/KEM.438.163
Uhlmann E., Rosiwal S., Bayerlein K., Röhner M.:
Influence of grain size on the wear behavior of CVD diamond coatings in micro-EDM
In: International Journal of Advanced Manufacturing Technology 47 (2010), p. 919-922
ISSN: 0268-3768
DOI: 10.1007/s00170-009-2131-7
Uhlmann E., Röhner M., Rosiwal S., Domingos D.:
Influence of coatings in micro-EDM
16th International Symposium on Electromachining, ISEM 2010 (Shanghai)
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84883897735&origin=inward

Ahmed F., Durst K., Rosiwal S., Fandrey J., Schaufler J., Göken M.:
In-situ tensile testing of crystalline diamond coatings using Raman spectroscopy
In: Surface & Coatings Technology 204 (2009), p. 1022-1025
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2009.04.030

Hirmke J., Rosiwal S., Singer R.:
Monitoring oxygen species in diamond hot-filament CVD by zircon dioxide sensors
In: Vacuum 82 (2008), p. 599-607
ISSN: 0042-207X
DOI: 10.1016/j.vacuum.2007.09.002
Kellermann K., Bareiss C., Rosiwal S., Singer R.:
Well adherent diamond coatings on steel substrates
In: Advanced Engineering Materials 10 (2008), p. 657-660
ISSN: 1438-1656
DOI: 10.1002/adem.200800060

Hirmke J., Glaser A., Hempel F., Stancu GD., Röpcke J., Rosiwal S., Singer R.:
Improved flow conditions in diamond hot filament CVD-Promising deposition results and gas phase characterization by laser absorption spectroscopy
In: Vacuum 81 (2007), p. 619-626
ISSN: 0042-207X
DOI: 10.1016/j.vacuum.2006.08.004
Schade A., Rosiwal S., Singer R.:
Influence of surface topography of HF-CVD diamond films on self-mated planar sliding contacts in dry environments
In: Surface & Coatings Technology 201 (2007), p. 6197-6205
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2006.11.024

Bareiss C., Hackl G., Popovska N., Rosiwal S., Singer R.:
CVD diamond coating of steel on a CVD-TiBN interlayer
In: Surface & Coatings Technology 201 (2006), p. 718-723
ISSN: 0257-8972
DOI: 10.1016/j.surfcoat.2005.12.035
Bareiss C., Perle M., Rosiwal S., Singer R.:
Diamond coating of steel at high temperatures in hot filament chemical vapour deposition (HFCVD) employing chromium interlayers
In: Diamond and Related Materials 15 (2006), p. 754-760
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2005.10.053
Glaser A., Jentsch HG., Rosiwal S., Lüdtke A., Singer R.:
Deposition of uniform and well adhesive diamond layers on planar tungsten copper substrates for heat spreading applications
In: Materials Science and Engineering B-Advanced Functional Solid-State Materials 127 (2006), p. 186-192
ISSN: 0921-5107
DOI: 10.1016/j.mseb.2005.10.018
Glaser A., Rosiwal S., Singer R.:
Chemical vapor infiltration (CVI) – Part II: Infiltration of porous substrates with diamond by using a new designed hot-filament plant
In: Diamond and Related Materials 15 (2006), p. 49-54
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2005.07.010
Hirmke J., Hempel F., Stancu GD., Röpcke J., Rosiwal S., Singer R.:
Gas-phase characterization in diamond hot-filament CVD by infrared tunable diode laser absorption spectroscopy
In: Vacuum 80 (2006), p. 967-976
ISSN: 0042-207X
DOI: 10.1016/j.vacuum.2005.12.009
Hirmke J., Schwarz S., Rottmair CA., Rosiwal S., Singer R.:
Diamond single crystal growth in hot filament CVD
In: Diamond and Related Materials 15 (2006), p. 536-541
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2006.01.003
Perle M., Bareiss C., Rosiwal S., Singer R.:
Generation and oxidation of wear debris in dry running tests of diamond coated SiC bearings
In: Diamond and Related Materials 15 (2006), p. 749-753
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2005.10.069
Schade A., Rosiwal S., Singer R.:
Tribological behaviour of and fibre textured CVD diamond films under dry planar sliding contact
In: Diamond and Related Materials 15 (2006), p. 1682-1688
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2006.02.008

Glaser A., Jentsch HG., Rosiwal S., Lüdtke A., Singer R.:
Uniform diamond coatings on planar tungsten copper substrates for heat spreading applications
16th Internationales Plansee Seminar 2005 (Reutte)
In: 16th Internationales Plansee Seminar 2005 Proceedings, Powder Metallurgical High Performance Materials, Vol. 1 2005
Rupprecht S., Bloch-Birkholz A., Lethaus B., Rosiwal S., Neukam FW., Schlegel A.:
The bone-metal interface of defect and press-fit ingrowth of microwave plasma-chemical vapor deposition implants in the rabbit model
In: Clinical Oral Implants Research 16 (2005), p. 98-104
ISSN: 0905-7161
DOI: 10.1111/j.1600-0501.2004.01079.x

Glaser A., Rosiwal S., Freels B., Singer R.:
Chemical vapor infiltration (CVI)-Part I: A new technique to achieve diamond composites
In: Diamond and Related Materials 13 (2004), p. 834-838
ISSN: 0925-9635
DOI: 10.1016/j.diamond.2003.10.041
Schade A., Perle M., Rosiwal S., Singer R.:
Micro structured CVD diamond coated sliding bearings for improved tribological performance under dry running conditions
In: Materialwissenschaft und Werkstofftechnik 35 (2004), p. 929-935
ISSN: 0933-5137
DOI: 10.1002/mawe.200400831
Schwarz S., Rottmair CA., Hirmke J., Rosiwal S., Singer R.:
CVD-diamond single-crystal growth
In: Journal of Crystal Growth 271 (2004), p. 425-434
ISSN: 0022-0248
DOI: 10.1016/j.jcrysgro.2004.08.003
URL: http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TJ6-4DN2F3G-2&_user=616145&_coverDate=11%2F15%2F2004&_alid=882231821&_rdoc=5&_fmt=high&_orig=search&_cdi=5302&_sort=d&_docanchor=&view=c&_ct=5&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=aab768e5088b5cd3b830778b911906c1

Glaser A., Rosiwal S., Singer R.:
Herstellung neuartiger Substratwerkstoffe durch Infiltration mit Diamant aus der Gasphase
14. Symposium Verbundwerkstoffe und Werkstoffverbunde
Schwarz S., Rosiwal S., Musayev Y., Singer R.:
High temperature diffusion chromizing as a successful method for CVD-diamond coating of steel Part II
In: Diamond and Related Materials 12 (2003), p. 701-706
ISSN: 0925-9635
Singer R., Körner C., Rosiwal S.:
From New Materials to Finished Components – Metals Research at the WTM institute of the University of Erlangen-Nuernberg
In: Maschinenbau in Bayern 2003, 2003, p. 46-49
(anderer)

Altes A., Heiderhoff R., Balk LJ., Jentsch HG., Rosiwal S.:
Comparison of thermal conductivities on abraded and untreated CVD-Diamond obtained by scanning thermal microscopy
In: International Journal of Modern Physics B 16 (2002), p. 922-926
ISSN: 0217-9792
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0037139065&origin=inward
Rupprecht S., Bloch-Birkholz A., Rosiwal S., Neukam FW., Wiltfang J.:
Examination of the Bone-Metal Interface of Titanium Implants Coated by the Microwave Plasma Chemical Vapor Deposition Method
In: International Journal of Oral & Maxillofacial Implants 17 (2002), p. 778-785
ISSN: 0882-2786
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0036834274&origin=inward
Schwarz S., Musayev Y., Rosiwal S., Schaufler C., Singer R., Meerkamm H.:
High temperature diffusion chromizing as a sucsessful method for CVD-diamond coating of steel
In: Diamond and Related Materials (2002), p. 757-762
ISSN: 0925-9635
URL: http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6TWV-44VGB6Y-7&_user=616145&_coverDate=06%2F30%2F2002&_alid=61213825&_rdoc=6&_fmt=summary&_orig=search&_cdi=5572&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=b570dd5ffcb188afd2838a21b782f347
Schwarz S., Rosiwal S., Frank M., Breidt D., Singer R.:
Dependence of the growth rate, quality and morphology of diamond coatings on the pressure during the CVD-process in an industrial hot-filament plant
In: Diamond and Related Materials (2002), p. 589-595
ISSN: 0925-9635
DOI: 10.1016/S0925-9635(01)00702-6
URL: http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6WW2-46922JT-2R&_user=616145&_coverDate=07%2F15%2F2002&_alid=61213825&_rdoc=4&_fmt=summary&_orig=search&_cdi=7118&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=96e19a3f085215738b5c6e838997cee5
Zeiler E., Schwarz S., Rosiwal S., Singer R.:
Structural changes of tungsten heating filaments during CVD of diamond
In: Materials Science and Engineering A335 (2002), p. 236-245
ISSN: 0025-5416
DOI: 10.1016/S0921-5093(01)01933-5
URL: http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6WW2-46R0CM8-15J&_user=616145&_coverDate=09%2F09%2F2002&_alid=61213825&_rdoc=1&_fmt=summary&_orig=search&_cdi=7118&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=efd9e0b552f6ef425492587f3b7facea

Jentsch HG., Berner A., Eberlein W., Rosiwal S., Singer R., Breit N., Dwars A., Schreyer N.:
CVD-Diamond-coatings on silicon-carbide-bearings for dry-running-conditions
Symposium Tribological Coatings for Components (München)
In: Werkstoffwoche 2001, München: 2001
Jentsch HG., Eibisch H., Rosiwal S., Singer R.:
High growth rate and high quality CVD diamond growth
Applied Diamond Coating / Frontier Carbon Technology (Auburn)
In: Applied Diamond Coating / Frontier Carbon Technology 2001
Rosiwal S.:
Final Report of the Bavarian Joint Research Program on Surface Technology, Second Phase (FOROB II)
Erlangen: Eigenverlag, 2001
URL: http://www.abayfor.de/forob2
Schwarz S., Musayev Y., Rosiwal S.:
Diamant auf Stahl. Diffusionschromierung im Vakuum für die CVD-Diamantbeschichtung
In: Magazin für Oberflächentechnik 2001 (2001), p. 59-62
ISSN: 0026-0797
URL: http://www.hanser.de/zeitschriften-db/MO/MO100934.htm
Schwarz S., Zeiler E., Rosiwal S., Singer R.:
Diamond Coatings as Wear Protection for Metallic Devices with Complex Geometry
In: S. Rosiwal (ed.): FOROB II Abschlußbericht, 2001, p. 33-50

Jentsch HG., Rosenbauer G., Rosiwal S., Singer R.:
Graphite interlayer formation during CVD diamond coating of iron base alloys: The analogy to metal dusting
In: Advanced Engineering Materials 2 (2000), p. 369-374
ISSN: 1438-1656
URL: http://www.sciencedirect.com/science?_ob=ArticleURL&_udi=B6WW2-46WP5DF-346&_user=616145&_coverDate=10%2F01%2F2002&_alid=61213825&_rdoc=7&_fmt=summary&_orig=search&_cdi=7118&_sort=d&_st=4&_docanchor=&_acct=C000032322&_version=1&_urlVersion=0&_userid=616145&md5=5c5ca2e6e0cf3e86643a51b2e4f6587b
Zeiler E., Rosiwal S., Singer R., Klaffke D.:
Reducing Friction and Wear of Titanium Alloys by CVD-Diamond Coating
12th International Colloquium (Esslingen)
In: TRibology 2000 – PLUS 2000

Grögler T., Rosiwal S., Singer R.:
Verschleißschutz von Titanlegierungen für die Luftfahrttechnik durch CVD-Diamantschichten
Werkstoffwoche ’98 (München)
In: R. Stauber, C. Liesner, R. Bütje, M. Bannasch (ed.): Werkstoffe für die Verfahrenstechnik/Werkstoffwoche 98, Symposium 2 1999
Grögler T., Zeiler E., Auer W., Mayerhofer C., Rosiwal S., Singer R.:
Thermodynamic and Kinetic Investigation of Low Pressure Hydrogen Absorption by the Titanium Alloy Ti-6Al-4V
Titanium ’99 (St. Petersburg, 7. Juni 1999 – 11. Juni 1999)
In: I. V. Gorynin, S. S. Ushkov (ed.): Proceedings of the Ninth World Conference of Titanium 1999
Grögler T., Zeiler E., Plewa O., Rosiwal S., Singer R.:
CVD diamond films as protective coatings on titanium base alloys
In: Journal of Advanced Materials 31 (1999), p. 8-13
ISSN: 1070-9789
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0343081469&origin=inward
Grögler T., Zeiler E., Rosiwal S., Singer R.:
3D-Diamantbeschichtung von Titanverdichterschaufeln in Flugtriebwerken
Workshop Hochleistungsschichten für Verbrennungsmotoren (Frankfurt/Main)
Heinrich G., Rosiwal S., Singer R.:
Biokompatibilitaet von CVD-Diamantschichten auf Titanlegierungen
Werkstoffwoche ’98 (München, 12. Oktober 1998 – 15. Oktober 1998)
In: H. Planck, H. Stallforth (ed.): Werkstoffe für die Medizintechnik/Werkstoffwoche 98, Symposium 4 1999
Heinrich G., Sörgel U., Hölzel P., Rosiwal S., Singer R.:
Characterization of CVD-Diamond Coated Titanium Alloys for Biomedical Applications
9th Cimtec-World Forum on New Materials (Florenz, 14. Juni 1998 – 19. Juni 1998)
In: P. Vincenzini (ed.): Vol. 21 Diamond Films – II, Proceedings of Topical Symposium IV „Diamond Films: Synthesis, Processing and Applications“ of the Forum on New Materials of the 9th CIMTEC-World Ceramics Congress and Forum on New Materials 1999
Klaffke D., Zeiler E., Grögler T., Hiltner K., Rosiwal S., Singer R.:
Friction and wear behaviour of polycrystalline diamond coatings on Ti-6Al-4V in sliding contact with ceramics
In: Tribologie und Schmierungstechnik 46 (1999), p. 45-49
ISSN: 0724-3472
Rosiwal S., Zeiler E., Rüffer M., Schwarz S., Lemmer O., Singer R.:
Well adherent and morphologically controlled diamond coatings on three dimensional engineering components: A physicists dream or an engineer’s reality?
International Confernce on Metallurgical Coatings and Thin Films (San Diego)
Zeiler E., Grögler T., Franz A., Plewa O., Rosiwal S., Singer R.:
Erosion resistance of CVD diamond-coated titanium alloy for aerospace applications
In: Surface & Coatings Technology 112 (1999), p. 129-132
ISSN: 0257-8972
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0033077682&origin=inward
Zeiler E., Grögler T., Heinrich G., Rosiwal S., Singer R.:
Diamond coatings – a new approach for wear protection of titanium alloys
Titanium ’99 (St. Petersburg, 7. Juli 1999 – 11. Juli 1999)
In: I. V. Gorynin, S. S. Ushkov (ed.): Proceedings of the Ninth World Conference of Titanium 1999
Zeiler E., Hiltner K., Lemmer O., Rosiwal S., Singer R.:
3D-Diamantbeschichtung von Titanbauteilen
Werkstoffwoche 98 (München, 12. Oktober 1998 – 15. Oktober 1998)
In: H. Dimigen, W. Paatsch (ed.): Oberflächentechnik / Werkstoffwoche 98, Symposium 11 1999
Zeiler E., Klaffke D., Hiltner K., Grögler T., Rosiwal S., Singer R.:
Tribological performance of mechanically lapped chemical vapor deposited diamond coatings
In: Surface & Coatings Technology (1999), p. 599-608
ISSN: 0257-8972
DOI: 10.1016/S0257-8972(99)00136-X

Grögler T., Franz A., Klaffke D., Rosiwal S., Singer R.:
Tribological optimization of CVD diamond coated Ti-6A1-4V
In: Diamond and Related Materials 7 (1998), p. 1342-1347
ISSN: 0925-9635
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032172524&origin=inward
Grögler T., Plewa O., Rosiwal S., Singer R.:
CVD diamond films as protective coatings on titanium alloys
In: International Journal of Refractory Metals & Hard Materials 16 (1998), p. 217-222
ISSN: 0263-4368
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0031639892&origin=inward
Grögler T., Zeiler E., Hörner A., Rosiwal S., Singer R.:
Microwave-plasma-CVD of diamond coatings onto titanium and titanium alloys
In: Surface & Coatings Technology 98 (1998), p. 1079-1091
ISSN: 0257-8972
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0039355516&origin=inward
Heinrich G., Rinne B., Thull R., Rosiwal S., Singer R.:
Characterization of CVD diamond-coated titanium base compounds for biomedical applications
In: Biomedizinische Technik (1998), p. 382-383
ISSN: 0013-5585
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0032239239&origin=inward
Raduta S., Grötzschel G., Kaschta J., Rosiwal S., Singer R.:
Fabrication and Properties of Injection Moulded Hardmetal Parts by use of a Pressure Die Casting Machine
1998 PM World Congress (Granada)

Grögler T., Hörner A., Rosiwal S., Singer R.:
Mikrowellenplasma-CVD- Abscheidung von Diamantschichten auf Titan und Titanlegierungen
Werkstoffwoche ’96
In: G. Ziegler, H. Cherdron, W. Hermel, J. Hirsch, H. Kolaska (ed.): Werkstoff- und Verfahrenstechnik/Werkstoffwoche ’96, Symposium 6 1997
Grögler T., Zeiler E., Dannenfeldt M., Rosiwal S., Singer R.:
Growth stages of chemical vapor deposited diamond on the titanium alloy Ti-6A1-4V
In: Diamond and Related Materials 6 (1997), p. 1658-1667
ISSN: 0925-9635
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0040309623&origin=inward
Heinrich G., Grögler T., Rosiwal S., Singer R.:
CVD diamond coated titanium alloys for biomedical and aerospace applications
In: Surface & Coatings Technology (1997), p. 514-520
ISSN: 0257-8972
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0031247495&origin=inward
Zeiler E., Grögler T., Plewa O., Winter R., Rosiwal S., Singer R.:
CVD-Diamantschichten als Verschleißschutz von Metallen
2. Industriefachtagung Oberflächen- und Wärmebehandlungstechnik OWT’97 (Chemnitz)

Grögler T., Heinrich G., Rosiwal S., Singer R.:
Diamantschichten als Verschleißschutz
Neue Anwendungen für moderne Oberflaechentechnologien (Nürnberg)
Heinrich G., Grögler T., Rosiwal S., Singer R., Stöckel R., Ley L.:
The influence of diamond chemical vapour deposition coating parameters on the micro structure and properties of titanium substrates
In: Diamond and Related Materials 5 (1996), p. 304-307
ISSN: 0925-9635
URL: https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0041686948&origin=inward

Rosiwal S.:
Grundlagen und technische Anwendungsmöglichkeiten der Methode der Differenzreflektometrie für die schnelle und zerstörungsfreie Oberflächenanalyse (Dissertation, 1993)
Schriever A., Rosiwal S., Becker J., Heidemann D.:
Relative Farbbestimmung dentaler Werkstoffe unter Anwendung spektraler Reflexionsmessungen
In: Deutsche zahnarztliche Zeitschrift 48 (1993), p. 167-169
ISSN: 0012-1029
Schubert E., Queitsch R., Bergmann HW., Rosiwal S., Schutte K.:
Excimer laser applications for the automotive industry
2nd EUREKA 205 on „Excimer laser applications“ (Erlangen, 1. April 1993 – 2. April 1993)
In: H. W. Bergmann, K. Schutte (ed.): Proceedings of 2nd EUREKA 205 on „Excimer laser applications“ 1993

Hitzler H., Pfleiderer C., Greulich KO., Rosiwal S., Bergmann HW.:
Ein Quarzfaserbündel mit spektrometrischer Prozeßkontrolle zur Oberflächenbearbeitung mit dem Excimerlaser
11. Internationaler Kongress Laser in der Technik
In: W. Waidelich (ed.): Proceedings of 11th International Congress Laser in Engineering, Berlin: 1992

Raab WH., Rosiwal S., Reithmayer K., Bergmann HW.:
Die Differenzreflektometrie als mögliche Prozeßsteuerung für den Lasereinsatz in der Zahnheilkunde
In: Deutsche zahnarztliche Zeitschrift 46 (1991), p. 729-733
ISSN: 0012-1029
Rosiwal S., Schutte K., Queitsch R., Bergmann HW.:
Oberflächenanalyse von Metallen mit der Methode der Differenzreflektometrie
In: Blech, Rohre, Profile 38 (1991), p. 973-976
ISSN: 0006-4688
Schubert E., Rosiwal S., Bergmann HW.:
Investigations on excimer-laser-treated Cu/Cr contact material
ECO 4 (Den Haag)
In: Proceedings of SPIE – The International Society for Optical Engineering 1503 1991

Bergmann HW., Schubert E., Rosiwal S., Schmatjko KJ., Schmidt K.:
Surface Treatments with Excimer Lasers for the Automotive Industry
Int. Conf. on Laser systems Application in Industry (Turin)
In: Proc. of the Int. Conf. on Laser systems Application in Industry 1990
Rosiwal S.:
Prozesskontrolle in der Laser-Oberflächenbehandlung mit Simultanspektrometer
Opto 7 (Nürnberg)
In: Tagungsband Opto 7 1990
Rosiwal S., Bergmann HW.:
Surface treatments with the excimer laser and quality control by means of difference reflectometry
EU205, int. workshop
In: C. Fotakis (ed.): Excimer laser applications and optical components, EU205, int. workshop, Heraklion: 1990
Rosiwal S., Bergmann HW.:
Surface treatments with the excimer laser and quality control by means of difference reflectometry
3rd Eur. Conf. on Laser Treatment of Materials ECLAT ’90 (Erlangen)
In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT ’90 Vol. 2 1990
Schlemper K., Rosiwal S., Bergmann HW., Thomas L.:
Differenzreflektometrie an NiAl- und CoGa-Legierungen nach einer Belichtung mit intensiver UV-Strahlung
In: Zeitschrift für Metallkunde 81 (1990), p. 761-769
ISSN: 0044-3093
Schlemper K., Rosiwal S., Bergmann HW., Thomas L.:
Optical Investigations of NiAl- and CoGa-Surfaces After Irradiation With Intensive UV-light
3rd Eur. Conf. on Laser Treatment of Materials ECLAT ’90 (Erlangen)
In: H. W. Bergmann, R. Kupfer (ed.): Proc. of ECLAT ’90 Vol. 2 1990

Schubert E., Bergmann HW., Rosiwal S., Barton G., Richter KE.:
Metallurgical Aspects of Surface Treatments with Excimer Lasers
21st Int. Symp. on Automotive Technology and Automation ’89 (Wiesbaden)
In: Proc. of 21st ISATA ’89 1989
Schubert E., Rosiwal S., Bergmann HW.:
Möglichkeiten der Differenzreflektometrie bei der Entwicklung einer optischen on-line Qualitätskontrolle für die Materialbearbeitung mit dem Excimerlaser
In: Opto-Elektronik-Magazin 5 (1989), p. 334-343
ISSN: 0930-9713

Vorlesung

Seminar

Exkursion

Exkursion WTM

Professor

Adresse

Kontakt

Publikationen

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2013

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

2001

2000

1999

1998

1997

1996

1993

1992

1991

1990

1989

Lehrveranstaltungen